Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
White mid-tower case with wraparound tempered glass panels and three front 120 mm fans

NZXT

NZXT H6 Flow CC-H61FW-01 PC case

SKU CH-EWRK-64D77 MPN CC-H61FW-01

A compact dual-chamber mid-tower with panoramic tempered glass, three pre-installed 120 mm front fans, support for up to 360 mm top radiators and 365 mm GPUs.

  • Motherboard CompatibilityATX / Micro ATX / Mini ITX
  • ColorWhite
  • Case MaterialSGCC Steel, Ultra-Clear Tempered Glass
  • TypeMid Tower
  • Side Panel2 x Sides Tempered Glass Panel
  • Front Ports2 x USB 3.2 Gen 1 Type-A, 1 x USB 3.2 Gen 2 Type-C, 1 x Audi

Options H6 Flow (White)

  • Dual-chamber layout isolates PSU and storage for a cleaner interior
  • Three 120 mm fans pre-installed at the front-right corner deliver strong airflow out of the box
  • Wraparound tempered glass on two sides gives an unobstructed view of components
  • Supports up to 360 mm radiator on top and 365 mm graphics card for high-end builds
  • Tool-free side and top panels plus wide cable channels make assembly and upgrades straightforward

Compact dual-chamber layout

The NZXT H6 Flow CC-H61FW-01 is a mid-tower case built around a dual-chamber layout that separates the power supply and storage from the main component zone. It supports ATX, Micro ATX and Mini ITX motherboards and ships in a white finish with tempered glass on the front and side panels. The design targets builders who want a clean internal look without sacrificing airflow space.

365 mm GPU and 163 mm cooler headroom

The case fits graphics cards up to 365 mm long and CPU coolers up to 163 mm tall, covering most mainstream and enthusiast air coolers. A single 3.5-inch bay and two 2.5-inch bays handle storage, while the power-supply compartment accepts units up to 200 mm deep. Seven expansion slots give room for full-length cards and additional brackets.

USB 3.2 Gen 2 Type-C front port

The front I/O panel provides two USB 3.2 Gen 1 Type-A ports, one USB 3.2 Gen 2 Type-C port and a combined audio jack. Top and rear mounts accept radiators up to 360 mm and 120 mm respectively, while the front-right corner comes with three pre-installed 120 mm fans and filtered mesh panels. Tool-less glass panels simplify access for upgrades.

Helstu kostir

  • Dual-chamber layout isolates PSU and storage for a cleaner interior
  • Three 120 mm fans pre-installed at the front-right corner deliver strong airflow out of the box
  • Wraparound tempered glass on two sides gives an unobstructed view of components
  • Supports up to 360 mm radiator on top and 365 mm graphics card for high-end builds
  • Tool-free side and top panels plus wide cable channels make assembly and upgrades straightforward

Tæknilýsing

Motherboard CompatibilityATX / Micro ATX / Mini ITX
ColorWhite
Case MaterialSGCC Steel, Ultra-Clear Tempered Glass
TypeMid Tower
Side Panel2 x Sides Tempered Glass Panel
Front Ports2 x USB 3.2 Gen 1 Type-A, 1 x USB 3.2 Gen 2 Type-C, 1 x Audio,
BrandNZXT
ModelCC-H61FW-01
Part NumberCC-H61FW-01
Internal 3.5" Drive Bays1
Internal 2.5" Drive Bays2
Expansion Slots7
Fan OptionsFront-Right: 3 x 120 mm (3 x F120Q included)
Top: 3 x 120 mm / 2 x 140 mm
Bottom: 2 x 140 mm
Rear: 1 x 120 mm
Filters: High-Performance Mesh
Pre-installed FansFront - 3 x 120mm
Radiator OptionsTop: Up to 360 mm
Rear: Up to 120 mm
Max GPU Length365 mm
Max CPU Cooler Height163 mm
Max PSU Length200 mm
Dimensions17.13" x 11.3" x 16.34"
Weight20.72 lbs.
FeaturesFan Specs
Model: F120Q Airflow Fan (Case Version)
Speed: 1200 ± 120 RPM
Airflow: 62.18 CFM
Static Pressure: 1.05 mm-H2O
Noise: 25.1 dBA
Fan Connector: 3-pin
Package Content1 x H6 Flow
3 x F120Q Airflow (Case Version)
1 x Installation Accessories
1 x User Guide
Sendingarþyngd10.93 kg
Stærð sendingar508 × 500 × 358 mm

Aðrar útgáfur af þessari vöru

3 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Will my ATX motherboard and 365 mm GPU fit together in the H6 Flow without clearance issues?

Yes, the case supports ATX boards and allows graphics cards up to 365 mm long, so both will fit simultaneously.

How can I verify the three included 120 mm fans are spinning correctly after I power on the system?

Connect the fans to the motherboard or a fan hub, then check RPM readings in BIOS or monitoring software to confirm all three are running.

Does the H6 Flow ship with mounting hardware for 2.5 inch SSDs and 3.5 inch hard drives, or must I buy brackets separately?

The case includes trays for two 2.5 inch drives and one 3.5 inch drive, so no extra brackets are needed for those bays.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.