Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Black 50mm square cooling fan with two power wires

OEM Industries

OEM Industries AD0512LS-G70 50mm Sleeve Bearing Fan

SKU CH-5858-SNW99

50 mm sleeve-bearing DC fan runs on 12 V at 0.10 A with two-wire power

  • ColorBlack
  • TypeFan only
  • Fan Size50mm
  • Bearing TypeSleeve Bearing
  • Power Connector2 Wires
  • LEDNo
  • 50 mm compact frame fits tight spaces
  • 12 V 0.10 A draw keeps power use low
  • sleeve bearing runs quietly at idle
  • two-wire connector simplifies installation
  • 5010 form factor suits charger and small builds

Compact 50 mm cooler for tight builds

The OEM Industries AD0512LS-G70 is a 50 mm square fan designed for small-form-factor CPU air coolers. Its 12 V, 0.10 A motor suits low-power thermal solutions in embedded or slim desktop systems.

Sleeve bearing keeps noise low

A sleeve bearing reduces acoustic output during typical operation while the two-wire supply simplifies wiring. The black frame blends with dark heatsinks and draws minimal current from a 12 V rail.

Two-wire lead eases integration

No LED lighting or PWM control is included, so the unit suits constant-speed applications. The bare two-wire connector allows direct soldering or crimping to custom harnesses for charger or industrial use.

Helstu kostir

  • 50 mm compact frame fits tight spaces
  • 12 V 0.10 A draw keeps power use low
  • sleeve bearing runs quietly at idle
  • two-wire connector simplifies installation
  • 5010 form factor suits charger and small builds

Tæknilýsing

ModelAD0512LS-G70
ColorBlack
TypeFan only
Fan Size50mm
Bearing TypeSleeve Bearing
Power Connector2 Wires
LEDNo

Spurningar um þessa vöru

How do I mount the AD0512LS-G70 50mm fan and which step is often missed?

Align the four corner holes with the 50mm chassis or heatsink mount, insert screws through the frame, then connect the two wires to a 12 V DC source observing polarity; the step most often missed is confirming the red wire is positive before powering on.

What maintenance will the sleeve bearing need over time?

The sleeve bearing is not user-serviceable; when noise or vibration increases after extended use the entire fan must be replaced as no lubrication port or bearing cartridge is provided.

What limit appears first when the fan runs continuously at 12 V 0.10 A?

Sleeve bearing wear is the first limit under sustained operation; rising friction gradually reduces airflow and increases acoustic noise until replacement becomes necessary.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.