Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Black 120mm square cooling fan with 38mm thickness and three-wire connector

OEM Industries

OEM Industries DATA1238B4U 120mm 2 Ball 24V 3 Wire CPU cooler

SKU CH-RD3V-EDCS3

A 120 mm dual-ball-bearing fan running at 24 V with a three-wire connector, 38 mm thick for inverter cooling

  • ColorBlack
  • TypeFan only
  • Fan Size120mm
  • Bearing Type2 Ball
  • Power Connector3 Wires
  • LEDNo
  • 120 mm fan fits standard CPU cooler mounts
  • 38 mm thickness delivers high static pressure airflow
  • 24 V DC input suits industrial inverter power supplies
  • Dual ball bearing extends operating life over sleeve types
  • Three-wire connector provides tachometer signal for monitoring

120mm 24V Ball-Bearing Fan

The OEM Industries DATA1238B4U is a 120mm DC cooling fan designed for 24-volt systems. It uses a dual ball-bearing assembly and a three-wire power connector for speed monitoring. The frame measures 120 by 120 by 38 millimetres and draws 0.8 amps. No LED lighting is fitted.

Suits 24V Industrial Builds

This fan fits equipment that runs on a 24-volt DC supply and accepts a standard three-wire header. Builders working with 12-volt PC motherboards or four-wire PWM controllers cannot use it directly. Buyers needing variable speed control via PWM should look elsewhere.

Fan-Only Package

The unit ships as a bare fan without mounting brackets, screws or thermal compound. Installers must supply their own fixation hardware and any required wiring adapters. No software or driver bundle is included.

Helstu kostir

  • 120 mm fan fits standard CPU cooler mounts
  • 38 mm thickness delivers high static pressure airflow
  • 24 V DC input suits industrial inverter power supplies
  • Dual ball bearing extends operating life over sleeve types
  • Three-wire connector provides tachometer signal for monitoring

Tæknilýsing

ModelDATA1238B4U
ColorBlack
TypeFan only
Fan Size120mm
Bearing Type2 Ball
Power Connector3 Wires
LEDNo

Spurningar um þessa vöru

What power source must I already have to run the 24V 0.8A fan?

You need a 24V DC supply that can deliver at least 0.8A and a three-wire connector for power, ground and tachometer signal.

Will the 120mm 38mm thick frame fit in the same mounting holes as my existing 120mm fans?

Yes, the 120mm square footprint matches standard 120mm mounting patterns, but verify your chassis has 38mm clearance for the thicker frame.

How can I confirm the ball-bearing fan is spinning at the correct speed after installation?

Connect the third wire to a motherboard or fan controller header and monitor the reported RPM in BIOS or software to verify operation.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.