Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Black 50mm maglev fan with three-pin connector

OEM Industries

OEM Industries GM0505PHV2-A 5015 Maglev 50mm 3-Pin CPU cooler

SKU CH-1ETR-S16NM

A 50 mm maglev fan with a 3-pin connector runs at 5 V and 0.7 W for compact CPU cooling

  • ColorBlack
  • TypeFan only
  • Fan Size50mm
  • Power Connector3 Pin
  • LEDNo
  • Maglev bearing reduces friction for longer life
  • 5 V 0.7 W draw keeps power use low
  • 50 mm frame fits tight 1U spaces
  • 3-pin connector enables speed monitoring
  • Fan-only design suits custom heatsink builds

OEM Industries GM0505PHV2-A 50mm fan

This OEM Industries GM0505PHV2-A is a 50mm frame cooling fan that uses a maglev bearing and a 5 V 0.7 W motor. It connects through a standard three-pin header and carries no LED lighting. The unit is sold as a fan-only component for system integrators and repair technicians. ||

Suits tight 5015 mounts and low-voltage headers

Builders fitting a 5015 form-factor slot or a 5 V three-pin header will find this fan a direct match. Systems that require PWM speed control, larger frame sizes or illuminated cooling should look elsewhere because this model provides none of those features. ||

Three-pin 5 V power connector decides fit

The 3-pin 5 V connector is the single specification that determines whether this cooler can be powered and monitored on a given motherboard or controller. Verify the header voltage and pin count before purchase.

Helstu kostir

  • Maglev bearing reduces friction for longer life
  • 5 V 0.7 W draw keeps power use low
  • 50 mm frame fits tight 1U spaces
  • 3-pin connector enables speed monitoring
  • Fan-only design suits custom heatsink builds

Tæknilýsing

ModelGM0505PHV2-A
ColorBlack
TypeFan only
Fan Size50mm
Power Connector3 Pin
LEDNo

Spurningar um þessa vöru

Will the 50mm GM0505PHV2-A fit the 3-pin header on my older motherboard?

Yes, the fan uses a standard 3-pin connector that matches legacy 3-pin CPU fan headers on older boards.

How can I confirm the maglev bearing fan is running correctly after installation?

Check the BIOS or monitoring software for a stable RPM reading from the CPU fan header; the 3-wire connection reports speed so you can verify operation.

Does the GM0505PHV2-A package include mounting hardware or thermal paste, or must I buy them separately?

The product is listed as fan only with a 3-pin power connector; no mounting brackets, screws or thermal compound are mentioned, so plan to source those separately.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.