Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Small 60mm two-tone notebook blower fan with three-pin connector

OEM Industries

OEM Industries HY60A-05A 60mm 5V 0.19A 3-pin CPU cooler

SKU CH-Z4WJ-SCH4A

60 mm notebook blower fan runs on 5 V and draws 0.19 A via a 3-pin connector

  • Color2-Tone
  • TypeFan only
  • Fan Size60mm
  • Power Connector3 Pin
  • Compact 60 mm footprint fits tight notebook chassis
  • 5 V 0.19 A draw keeps power use low
  • Three-pin connector enables speed monitoring
  • Blower-style airflow directs heat out of slim vents
  • Two-tone finish distinguishes intake from exhaust

Compact 5 V notebook blower

This 60 mm blower-style fan runs on 5 V at 0.19 A and connects through a standard 3-pin header. It is designed as a replacement cooler for notebook chassis where a slim radial blower is the original thermal solution. The two-tone finish distinguishes the unit visually but does not affect airflow.

Direct swap for failed OEM blowers

When the original notebook blower develops bearing noise or stops spinning, this unit fits the same mounting pattern and voltage requirement. The jump is worth it when the laptop still meets the user’s performance needs and a full system replacement is not justified. No additional wiring or voltage conversion is required.

Suits repair technicians

Builders assembling custom desktop rigs should look elsewhere, as the radial form factor and 5 V supply are intended for integrated notebook thermal modules. Users needing PWM speed control or larger airflow for desktop CPUs will not find those features here.

Helstu kostir

  • Compact 60 mm footprint fits tight notebook chassis
  • 5 V 0.19 A draw keeps power use low
  • Three-pin connector enables speed monitoring
  • Blower-style airflow directs heat out of slim vents
  • Two-tone finish distinguishes intake from exhaust

Tæknilýsing

ModelHY60A-05A
Color2-Tone
TypeFan only
Fan Size60mm
Power Connector3 Pin

Spurningar um þessa vöru

What clearance is needed for the 60 mm fan frame?

The cooler uses a 60 mm square frame, so the mounting area must provide at least that much open space around the screw holes for the blower housing to sit flush.

How do I connect the 3‑pin connector to a 5 V header, and what mistake should I avoid?

Align the keyed 3‑pin plug with the 5 V fan header on the notebook board and press straight down; forcing it backwards bends the pins and prevents the tachometer signal from working.

When should the blower be cleaned or replaced?

If airflow drops or bearing noise appears, remove dust from the impeller blades with compressed air; persistent noise or vibration after cleaning means the 5 V 0.19 A motor has worn and the unit should be replaced.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.