Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Small black 50mm square cooling fan with maglev bearing

OEM Industries

OEM Industries ME50152V1-000C-A99 50mm Maglev CPU cooler

SKU CH-F8ES-HM9ZD MPN ME50152V1-000C-A99

50 mm maglev fan delivers 18.6 CFM airflow at 40 dB noise using 2.28 W from a 12–24 V supply

  • ColorBlack
  • TypeFan only
  • Fan Size50mm
  • Bearing TypeMaglev
  • Power Connector2 Wires
  • LEDNo
  • Maglev bearing reduces friction for longer life
  • 50 mm frame fits compact CPU cooler builds
  • 6 CFM airflow moves heat from small heatsinks
  • 24 V, 2.28 W draw keeps power use low
  • 40 dB noise level suits quiet workstations

OEM Industries 50mm Maglev Fan

The OEM Industries ME50152V1-000C-A99 is a 50mm square cooling fan built for compact CPU coolers or tight chassis spots. It targets system integrators and DIY builders who need a low-profile airflow source that fits a 5015 form factor. The unit ships new and contains only the fan without additional mounting hardware.

Maglev Bearing And 3-Pin Connector

A magnetic bearing reduces mechanical friction, helping the fan sustain 18.6 CFM at a rated 40 dB noise level. The black frame measures 50 by 50 by 15 mm and accepts a 2-wire power feed through a 3-pin connector, allowing speed reporting on headers that support it. No LED lighting is included.

Replaces Worn 5015 Fans In Dense Builds

This model directly swaps into existing 5015 mounts where a failed or loud sleeve-bearing unit needs replacement. The 12–24 V operating range and 2.28 W draw suit both 12 V and 24 V system rails without modification. Buyers who need PWM control or larger airflow volumes should look elsewhere.

Helstu kostir

  • Maglev bearing reduces friction for longer life
  • 50 mm frame fits compact CPU cooler builds
  • 6 CFM airflow moves heat from small heatsinks
  • 24 V, 2.28 W draw keeps power use low
  • 40 dB noise level suits quiet workstations

Tæknilýsing

ModelME50152V1-000C-A99
ColorBlack
TypeFan only
Fan Size50mm
Bearing TypeMaglev
Power Connector2 Wires
LEDNo

Spurningar um þessa vöru

Does the 3-pin connector on the ME50152V1-000C-A99 carry a tach signal for speed monitoring?

The 3-pin connector includes a tach output so the motherboard can read the fan speed while the two power wires deliver 12 V to 24 V at 0.09 A.

Will the 50 mm by 15 mm frame fit a standard 5015 mounting pattern?

The housing measures 50 mm square and 15 mm thick, matching the common 5015 footprint used on many small-form-factor heatsinks.

How do I wire the two power leads and the third pin when installing this maglev fan?

Connect the two power wires to a 12 V to 24 V source and attach the third pin to the motherboard fan header for RPM reporting; reversing the power wires will prevent the fan from starting.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.