Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Black 80mm square cooling fan 15mm thick two pin power connector

OEM Industries

OEM Industries RDH8015B 80mm 12V 0.17A 2 Pin CPU Cooler

SKU CH-2EDJ-C90CS

An 80 mm ball-bearing fan draws 0.17 A at 12 V via a two-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Bearing TypeBall
  • Power Connector2 Pin
  • LEDNo
  • Compact 80 mm frame fits tight builds
  • Ball bearing runs quietly for longer life
  • 12 V, 0.17 A draws minimal power
  • Two-pin connector plugs straight into board
  • Pure fan unit — no LEDs to distract

Compact 80mm CPU Fan

The OEM Industries RDH8015B is an 80 by 15 millimetre case fan designed for CPU cooling in tight builds. It runs on 12 volts at 0.17 amps and uses a ball bearing for durability. The black frame carries no LED lighting.

Simple Two-Pin Install

Installation requires connecting the two-pin power lead to a matching motherboard header or fan controller. Polarity must be observed because the connector is not keyed. The thin 15 millimetre profile fits narrow clearances but offers no mounting hardware beyond standard screw holes.

Check Header And Clearance

Verify that your board provides a two-pin DC fan header or that you have a suitable adapter. Measure the available height above the socket to confirm the 15 millimetre thickness clears surrounding components. The fan draws 0.17 amps, so ensure the header can supply that current.

Helstu kostir

  • Compact 80 mm frame fits tight builds
  • Ball bearing runs quietly for longer life
  • 12 V, 0.17 A draws minimal power
  • Two-pin connector plugs straight into board
  • Pure fan unit — no LEDs to distract

Tæknilýsing

ModelRDH8015B
ColorBlack
TypeFan only
Fan Size80mm
Bearing TypeBall
Power Connector2 Pin
LEDNo

Spurningar um þessa vöru

How can I confirm the RDH8015B is spinning correctly after installation?

The fan runs on 12 V and draws 0.17 A; a working unit will spin steadily and move air through the 80 mm frame once powered.

What ships with the RDH8015B and what must I source separately?

The box contains the 80 mm ball-bearing fan with a 2-pin connector; mounting screws, a fan controller or a 3-pin adapter are not included.

Which version of this cooler matches a standard 80 mm mounting pattern?

The RDH8015B measures 80 x 15 mm and uses a 2-pin DC connector, fitting typical 80 mm case or heatsink mounts.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.