Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Grey aluminium dual-bay M.2 NVMe enclosure with USB-C cable

Orico

Orico M.2 Dual Bay NVMe Drive Enclosure 10Gbps USB 3.2 Gen2 2x4TB

SKU CH-B0CK-APGJS MPN M.2

Dual-bay NVMe enclosure accepts 2230 to 2280 drives up to 4 TB each, delivers 10 Gbps over USB 3.2 Gen 2, and includes tool-free installation with an aluminium heatsink

  • ColorGray
  • TypeEnclosure
  • MaterialAluminum
  • External InterfaceUSB 3.1 Type-C
  • HDD Count SupportedDual SSD
  • Number of Bay2 Bay

HDD Count Supported Dual SSD

Number of Bay 2 Bay

Size M.2 NVME SSD

Model 2 Bay

Yfirstrikaðar útgáfur eru til, en ekki til hér.

  • Dual NVMe bays expand storage up to 2x4TB
  • 10Gbps USB 3.2 Gen2 cuts large-file transfer time
  • All-aluminum body with thermal pad dissipates drive heat
  • Tool-free slide-in design with safety lock secures SSDs in seconds
  • Supports 2230 2242 2260 2280 M-key NVMe drives
  • TRIM and UASP keep sustained write performance high

Dual NVMe enclosure for two drives

This aluminum enclosure holds two M.2 NVMe SSDs up to 4 TB each. It connects via USB 3.2 Gen 2 Type-C at 10 Gbps and includes a USB-C to C/A cable. Tool-free installation and a safety lock button simplify drive swaps. Built-in heatsinks and thermal pads help manage temperatures during sustained transfers.

Suits users adding fast external NVMe storage

It fits NVMe M-key drives in 2230, 2242, 2260 and 2280 lengths. UASP and TRIM support maintain performance on Windows, macOS and Linux. Buyers needing SATA M.2 support or more than two bays should consider other enclosures. The single 10 Gbps link shares bandwidth between both drives.

10 Gbps USB 3.2 Gen 2 Type-C interface

This single port sets the maximum combined throughput for both SSDs. Real-world speed depends on the host controller and the installed drives. The enclosure is backward compatible with USB 3.0 and 2.0 hosts at reduced rates. No driver is required for plug-and-play operation.

Helstu kostir

  • Dual NVMe bays expand storage up to 2x4TB
  • 10Gbps USB 3.2 Gen2 cuts large-file transfer time
  • All-aluminum body with thermal pad dissipates drive heat
  • Tool-free slide-in design with safety lock secures SSDs in seconds
  • Supports 2230 2242 2260 2280 M-key NVMe drives
  • TRIM and UASP keep sustained write performance high

Tæknilýsing

BrandORICO
ColorGray
TypeEnclosure
MaterialAluminum
External InterfaceUSB 3.1 Type-C
HDD Count SupportedDual SSD
Number of Bay2 Bay
Maximum Capacity (per Bay)Up to 4TB

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How hot does the all-aluminium enclosure get when both 4TB NVMe drives run all day?

The aluminium body acts as a heatsink and the included silicone thermal pads move heat away from each NVMe SSD; no active fan is fitted.

What cable and host port do I need to reach the 10Gbps link speed?

A USB 3.2 Gen2 Type-C port and the supplied USB-C-to-C/A 2-in-1 cable are required for the 10Gbps rate.

Will my older USB 3.0 Type-A laptop still recognise both 2280 NVMe SSDs?

Yes — the enclosure is backward compatible with USB 3.0 and USB 2.0, though transfer speeds will fall to those bus limits.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.