Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Four green DDR3 ECC registered DIMMs with gold contacts

OWC

OWC 128GB (4×32GB) DDR3-1600 ECC RDIMM CL11 1.5V 240-pin for Supermicro 1017GR/R

SKU CH-S9EX-4SG09

128 GB DDR3-1600 ECC registered quad-rank kit of four 32 GB modules at CL11 and 1.5 V for Supermicro 1017GR and 1017R servers

  • Capacity128GB (4 x 32GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCYes

Capacity 128GB (4 x 32GB)

  • 128GB quad-channel capacity for memory-intensive server workloads
  • ECC registered design detects and corrects single-bit errors automatically
  • DDR3-1600 CL11 timing matches Supermicro 1017GR/R qualified speeds
  • 5V JEDEC-standard voltage ensures warranty-safe operation
  • 240-pin 4Rx4 RDIMM form factor fits approved SuperServer slots exactly

OWC 128GB DDR3 ECC RDIMM Kit

This OWC kit supplies 128 GB of DDR3-1600 ECC registered memory in four 32 GB modules. It is built for Supermicro SuperServer 1017GR and 1017R systems that require 240-pin RDIMMs running at 1.5 V with CL11 timing.

Suited for 1017GR and 1017R servers

The modules suit administrators upgrading or repairing those specific Supermicro platforms. They will not work in standard desktop boards, consumer laptops, or any system that only accepts unbuffered non-ECC DIMMs.

Simple DIMM installation

Install by powering down the server, opening the chassis, and seating each 240-pin module into the correct memory slots until the latches click. The most common issue is mixing these registered DIMMs with unbuffered memory, which prevents the system from posting.

Helstu kostir

  • 128GB quad-channel capacity for memory-intensive server workloads
  • ECC registered design detects and corrects single-bit errors automatically
  • DDR3-1600 CL11 timing matches Supermicro 1017GR/R qualified speeds
  • 5V JEDEC-standard voltage ensures warranty-safe operation
  • 240-pin 4Rx4 RDIMM form factor fits approved SuperServer slots exactly

Tæknilýsing

BrandOWC
Part Number1R6D34R4128S
Capacity128GB (4 x 32GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
Heat SpreaderNo
Compatible SystemSupermicro SuperServer 1017GR Series
Supermicro SuperServer 1017R Series

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

What server model must I already have for this 128GB DDR3-1600 ECC RDIMM kit to work?

The kit is validated for Supermicro SuperServer 1017GR and 1017R series systems that accept 240-pin DDR3 registered ECC memory.

Can I keep my existing unbuffered DDR3 modules and add these 4Rx4 registered DIMMs alongside them?

No, registered ECC modules cannot be mixed with unbuffered memory; all slots must use registered ECC DIMMs of the same type.

How do I confirm the 128GB kit is running at the correct 1600MHz CL11 1.5V settings after installation?

Check the BIOS memory information or use a tool such as dmidecode to verify each 32GB module reports DDR3-1600, CL11, 1.5V, and registered ECC operation.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.