OWC 8GB DDR4 2666MHz ECC SODIMM laptop RAM
- 8GB
- 260-Pin DDR4 SO-DIMM
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
OWC
Four 32 GB DDR4 2666 MHz ECC SODIMM modules totalling 128 GB for laptops, all-in-ones and NAS systems
Capacity 128GB (4 x 32GB)
Yfirstrikaðar útgáfur eru til, en ekki til hér.
This OWC kit supplies 128GB of DDR4 memory in four 32GB modules for laptops, all-in-one PCs and NAS units that accept 260-pin SO-DIMMs. The ECC unbuffered design targets systems that can use error-correcting memory for data integrity.
Rated at 2666MHz with CL19 timings and 1.2V operation, the modules maintain JEDEC-standard performance during extended workloads in compatible micro servers or NAS devices. Backward compatibility with 2400MHz and 2133MHz platforms allows the kit to run stably at lower speeds when the host system requires it.
The 260-pin DDR4 ECC unbuffered form factor is the single detail that determines whether this kit fits; systems needing non-ECC, registered or a different pin-count memory cannot use these modules.
| Brand | OWC |
|---|---|
| Part Number | 2C6D42R8128S |
| Capacity | 128GB (4 x 32GB) |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Heat Spreader | No |
| Recommend Use | Laptops, All-in-One Systems, and NAS Systems |
Aðrar útgáfur af þessari vöru
Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.
The modules run at 1.2 V with a CL19 latency; DDR4 at this voltage is designed for low power draw in laptops and NAS units, though exact wattage depends on the host system's memory controller and workload.
The system needs four DDR4 SO-DIMM slots, 260-pin connectors, and a memory controller that accepts unbuffered ECC modules at 2666 MHz (PC4-21300) with 1.2 V operation.
Yes — the kit is backwards compatible with 2400 MHz and 2133 MHz speeds, so it will run at the lowest common frequency when mixed with slower DDR4 modules.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Ekkert tungumál fannst.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?