Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Eight green DDR4 ECC registered DIMMs in anti-static tray

OWC

OWC 128GB (8x16GB) DDR4 2933 ECC Registered RDIMM 2Rx4 PowerEdge C4140

SKU CH-001V-AABGB

ECC Registered DDR4 2933 kit adds 128 GB across eight 16 GB modules for PowerEdge C4140 servers

  • Capacity128GB (8 x 16GB)
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.2V
  • ECCYes

Capacity 128GB (8 x 16GB)

Sjá 4 stillingar til viðbótar
  • 128 GB total capacity with eight 16 GB modules
  • ECC registered design detects and corrects data errors
  • 2933 MHz DDR4 speed rated at PC4-23400 CL21
  • Runs at 1.2 V for lower power draw
  • Compatible with PowerEdge C4140 and backward compatible to 2133, 2400, 2666 MHz

Server-grade memory kit for PowerEdge C4140

This 128GB kit supplies eight 16GB DDR4 2933 ECC registered RDIMMs built for the PowerEdge C4140 with SkyLake CPUs. It targets administrators who need to maximise capacity in that specific platform without mixing registered and unbuffered modules.

Steady throughput under registered ECC operation

Registered buffering and ECC correction keep data integrity intact during continuous multi-threaded workloads typical of virtualisation or database tasks. The modules run at 1.2V and fall back to 2133MHz, 2400MHz or 2666MHz when the system demands lower speeds.

Straightforward DIMM installation

Each 288-pin module slots into the C4140 memory channels without tools or heat spreaders to remove. The kit will not work in standard desktops and cannot be combined with unbuffered or load-reduced ECC memory, so verify the platform before ordering.

Helstu kostir

  • 128 GB total capacity with eight 16 GB modules
  • ECC registered design detects and corrects data errors
  • 2933 MHz DDR4 speed rated at PC4-23400 CL21
  • Runs at 1.2 V for lower power draw
  • Compatible with PowerEdge C4140 and backward compatible to 2133, 2400, 2666 MHz

Tæknilýsing

BrandOWC
Part Number2R9D42R4128K
Capacity128GB (8 x 16GB)
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemPowerEdge C4140 (SkyLake CPU)

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How much power does the 1.2V DDR4 2933 kit draw when the PowerEdge C4140 runs all day?

Each module operates at 1.2V, the standard DDR4 voltage, so the eight 16 GB sticks together run at the same low voltage as any JEDEC DDR4 2933 kit.

What must the server already have for this 8 x 16 GB registered ECC kit to work?

The PowerEdge C4140 must support DDR4 registered ECC RDIMMs with 2Rx4 organisation and 288-pin slots; it cannot accept unbuffered or load-reduced DIMMs.

Will these 2933 MHz modules run with the slower 2133, 2400 or 2666 MHz DIMMs already in the C4140?

Yes, the kit is backward compatible with 2133, 2400 and 2666 MHz speeds, so it will down-clock to match any slower DDR4 registered ECC memory already installed.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.