Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Two green DDR3L ECC registered DIMMs, 240-pin, no heat spreaders

OWC

OWC 16GB (2x8GB) DDR3L 1333 ECC Registered RDIMM Cisco UCS B440 M1 C460 M2

SKU CH-70K8-EXNBN

16 GB DDR3L ECC registered memory kit for Cisco UCS B440 M1 and C460 M2 servers

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes

Capacity 16GB (2 x 8GB)

  • ECC registered design prevents data errors in servers
  • 16 GB dual-channel kit boosts multitasking capacity
  • DDR3L 1333 MHz speed matches system specifications
  • 35 V low voltage reduces power consumption
  • 240-pin RDIMM form factor fits Cisco UCS B440 M1 and C460 M2

Cisco UCS Server Memory Kit

This kit supplies 16 GB of DDR3L ECC registered memory in two 8 GB modules for Cisco UCS B440 M1 and C460 M2 servers. The modules run at 1333 MHz with CL9 latency at 1.35 V. They are designed for workloads that require error correction and registered buffering.

240-Pin Registered DIMM Format

Each module uses the 240-pin RDIMM form factor with a 2Rx4 organisation and no heat spreader. The registered design reduces electrical load on the server memory controller, allowing stable operation in multi-DIMM configurations. Mixing with unbuffered or load-reduced ECC memory is not supported.

Replaces Cisco N01M308GB2 Series

This upgrade replaces Cisco part numbers N01M308GB2, UCSMR1X082RXA, UCSMR2X082RXB and UCSMR2X082RXC. It suits administrators extending the service life of existing B440 M1 or C460 M2 platforms. Buyers needing higher capacities per slot or different DDR generations should verify platform limits before ordering.

Helstu kostir

  • ECC registered design prevents data errors in servers
  • 16 GB dual-channel kit boosts multitasking capacity
  • DDR3L 1333 MHz speed matches system specifications
  • 35 V low voltage reduces power consumption
  • 240-pin RDIMM form factor fits Cisco UCS B440 M1 and C460 M2

Tæknilýsing

BrandOWC
Part Number1R3T32R4016P
Capacity16GB (2 x 8GB)
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemCisco UCS B440 M1
Cisco UCS C460 M2

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Does this DDR3L 1333 kit run at the full PC3L-10600 data rate in a Cisco UCS server?

Yes, the modules are rated for DDR3L 1333 (PC3L-10600) CL9 at 1.35 V, so they operate at that speed when the platform supports it.

Will these 240-pin registered DIMMs fit the memory slots in a Cisco UCS B440 M1 or C460 M2?

They are built to the 240-pin DDR3L RDIMM form factor specified for the Cisco UCS B440 M1 and C460 M2, matching the physical slot and keying.

What is the correct way to install the two 8 GB modules, and what mistake should I avoid?

Power down the server, open the chassis, align each module's notch with the slot key, press firmly until the ejector tabs click, and do not mix these registered DIMMs with unbuffered or load-reduced memory.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.