Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Two green 240-pin DDR3 RDIMM modules in a clear tray

OWC

OWC 16GB DDR3 1333 ECC Registered RDIMM 2x8GB DL2200 DL4000 NX3100

SKU CH-QC0X-J7WFS

16GB dual-channel DDR3 1333 ECC registered RDIMM kit for Dell PowerVault DL2200, DL4000 and NX3100 servers

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 16GB (2 x 8GB)

  • 16 GB ECC registered kit protects server data integrity
  • DDR3 1333 MHz CL9 matches Dell PowerVault specifications
  • Two 8 GB modules fill dual-channel slots
  • 5 V 240-pin RDIMM drops in without modification
  • Replaces Dell part numbers including A2984886 and SNPX3R5MC/8G

16 GB DDR3 1333 ECC RDIMM kit

This 16 GB kit contains two 8 GB DDR3 1333 registered DIMMs built for Dell PowerVault DL2200, DL4000 and NX3100 systems. It targets administrators who need to expand memory in those specific storage appliances without mixing registered and unbuffered modules.

ECC registered operation

The modules run at 1.5 V with CL9 latency and provide error-correcting registered operation required by the supported PowerVault platforms. They replace a long list of Dell part numbers so the upgrade can be sourced from a single kit rather than tracking individual spares.

240-pin form factor and server compatibility

Each stick uses the 240-pin DDR3 form factor and carries a 2Rx4 organisation suited to multi-socket server boards. The lack of heat spreaders keeps the profile low for dense chassis, while JEDEC and RoHS compliance ensures the modules meet the electrical and environmental specs the appliances expect.

Helstu kostir

  • 16 GB ECC registered kit protects server data integrity
  • DDR3 1333 MHz CL9 matches Dell PowerVault specifications
  • Two 8 GB modules fill dual-channel slots
  • 5 V 240-pin RDIMM drops in without modification
  • Replaces Dell part numbers including A2984886 and SNPX3R5MC/8G

Tæknilýsing

BrandOWC
Part Number1R3D32R4016P
Capacity16GB (2 x 8GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemDell PowerVault DL2200
Dell PowerVault DL4000
Dell PowerVault NX3100

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Will the 2Rx4 registered DIMMs need replacement if I exceed the 16GB kit capacity?

The kit provides 16GB across two 8GB modules. Adding more memory requires Dell PowerVault DL2200, DL4000 or NX3100 slot availability and matching DDR3 1333 ECC registered specifications.

What limits sustained throughput on these CL9 1333MHz modules?

The DDR3 1333 PC3-10600 CL9 rating sets the maximum data rate and latency ceiling under continuous server workloads.

How much heat and power do the 1.5V registered DIMMs produce all day?

Each module runs at 1.5V without a heat spreader. Registered ECC operation adds minimal overhead, so thermal output stays within standard DDR3 DIMM limits for 24/7 server use.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.