BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
OWC
Adds 16 GB of DDR4 ECC memory to Synology DS3018xs and DS3622xs+ NAS at 2666 MHz CL19 1.2 V
This 16 GB DDR4 2666 MHz CL19 module is built for the Synology DiskStation DS3018xs and DS3622xs+. It delivers ECC error correction and unbuffered operation at 1.2 V in a 260-pin SODIMM form factor. The single 2Rx8 stick installs directly into the compatible NAS chassis. It targets administrators who need a validated capacity increase for these specific platforms.
The module meets JEDEC PC4-21300 specifications and is ROHS compliant, ensuring a warranty-safe upgrade path. It runs at 2666 MHz but will down-clock to 2400 MHz or 2133 MHz if the system requires it. No additional software or configuration tools are bundled; the benefit comes from the hardware’s standards adherence and tested compatibility alone.
The 16 GB stick expands the NAS memory pool, allowing more concurrent applications, larger file caches and smoother virtual-machine workloads. Performance scales until the platform’s maximum supported memory or slot count is reached. Builders needing higher densities or additional ranks must look beyond this single-module kit.
| Brand | OWC |
|---|---|
| Part Number | 2C6D42R816GB |
| Capacity | 16GB (1 x 16GB) |
| Type | 260-Pin DDR4 ECC SODIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Heat Spreader | No |
| Compatible System | Synology DiskStationDS3018xs Synology DiskStationDS3622xs+ |
No firmware is required; the module is JEDEC-standard DDR4 2666 CL19 and runs at 1.2V, so it remains compatible for the life of the DS3018xs without further changes.
The CAS latency of CL19 at 2666MHz sets the timing ceiling; sustained workloads hit that latency boundary before any thermal or voltage limit on this 1.2V unbuffered module.
The module has no heat spreader and draws only 1.2V, so it adds negligible heat and zero audible noise during continuous operation.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Ekkert tungumál fannst.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?