Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Two green 240-pin DDR3 RDIMM modules with black chips, no heat spreader

OWC

OWC 1R3D32R4016P 16GB (2x8GB) DDR3 1333 ECC Registered RDIMM memory upgrade

SKU CH-QT68-D0QA8

16 GB dual-channel DDR3-1333 ECC registered RDIMM kit for Supermicro X8DA6, X8DAE, X8DAH+, X8DAL and X8DT3 workstations and servers

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 16GB (2 x 8GB)

  • ECC registered design protects data integrity in servers
  • 16 GB kit (2 × 8 GB) expands workstation memory capacity
  • DDR3 1333 MHz CL9 matches Supermicro X8 series specs
  • 5 V 240-pin RDIMM drops into registered DIMM slots
  • Replaces six Supermicro part numbers for straightforward upgrades

16GB DDR3 1333 ECC Registered Kit

This OWC kit provides 16 GB of DDR3 1333 memory in a matched pair of 8 GB modules. Each stick is a 240-pin ECC Registered DIMM rated at PC3-10600 with CL9 latency and 1.5 V operation. It is built for workstations and servers that require registered error-correcting memory.

Supermicro X8 Series Compatibility

The modules are validated for Supermicro X8DA6, X8DAE, X8DAH+, X8DAL and X8DT3 motherboard series. They will not work in standard desktop computers and cannot be mixed with unbuffered memory. Buyers needing non-ECC or unbuffered DDR3 for a consumer platform should look elsewhere.

Registered ECC DDR3 Requirement

This upgrade only fits systems that accept 240-pin DDR3 Registered ECC DIMMs running at 1.5 V. If your motherboard requires unbuffered, non-ECC or a different DDR generation, these modules will not function.

Helstu kostir

  • ECC registered design protects data integrity in servers
  • 16 GB kit (2 × 8 GB) expands workstation memory capacity
  • DDR3 1333 MHz CL9 matches Supermicro X8 series specs
  • 5 V 240-pin RDIMM drops into registered DIMM slots
  • Replaces six Supermicro part numbers for straightforward upgrades

Tæknilýsing

BrandOWC
Part Number1R3D32R4016P
Capacity16GB (2 x 8GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X8DA6 Series
Supermicro Motherboard X8DAE Series
Supermicro Motherboard X8DAH+ Series
Supermicro Motherboard X8DAL Series
Supermicro Motherboard X8DT3 Series

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

What is the maximum capacity this 16GB DDR3 1333 ECC RDIMM kit can reach in a Supermicro X8DA6 system?

The kit provides 16GB total across two 8GB modules. Maximum capacity depends on the specific motherboard model and its populated DIMM slots.

How much heat does this 1.5V registered DDR3 memory produce during continuous server workloads?

These modules run at 1.5V without heat spreaders. Registered ECC DDR3 typically operates within standard thermal limits for server environments with adequate chassis airflow.

Which motherboard feature must already be present to use this 240-pin registered ECC memory?

The motherboard must support DDR3 registered ECC RDIMMs. Compatible Supermicro X8DA6, X8DAE, X8DAH+, X8DAL and X8DT3 series boards provide this support.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.