Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green circuit board with gold edge connectors and black memory chips

OWC

OWC 2GB DDR3 1333 CL9 1Rx8 1.5V SODIMM memory upgrade

SKU CH-RB0V-D9PKS

A 2 GB DDR3 SODIMM running at 1333 MHz with CL9 latency for HP ProBook 4330s, 4331s, 4340s, 4421s and 4430s

  • Capacity2GB
  • Type204-Pin DDR3 Non-ECC SODIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCNo
  • Boost multitasking with 2GB DDR3 1333 CL9 module
  • JEDEC and RoHS compliant for warranty-safe upgrade
  • 5V low-voltage design reduces power consumption
  • 204-pin SODIMM fits HP ProBook 4330s 4331s 4340s 4421s 4430s
  • Easy DIY installation with OWC video guide

HP ProBook DDR3 SODIMM Upgrade

This 2 GB DDR3 1333 CL9 module is built for HP ProBook 4330s, 4331s, 4340s, 4421s and 4430s notebooks. It adds 204-pin non-ECC unbuffered memory to systems that accept PC3-10600 SO-DIMMs running at 1.5 V. Buyers who want more storage or need ECC support should look elsewhere.

Simple Laptop Memory Installation

Most ProBook models expose the SODIMM slot under a bottom access panel, so the module drops in without tools. Align the notch, press firmly until the side clips snap, then replace the cover. The usual issue is mixing speeds or capacities; keep all slots identical at 1333 MHz CL9 to avoid boot failures.

DDR3 1333 SO-DIMM Practical Limits

The DDR3 SO-DIMM interface caps at 1333 MHz with 1.5 V operation, so this module cannot run faster or at lower voltage. A single 2 GB stick leaves total capacity limited by the laptop's slot count and chipset maximum. Systems needing higher bandwidth or larger modules require a newer memory generation.

Helstu kostir

  • Boost multitasking with 2GB DDR3 1333 CL9 module
  • JEDEC and RoHS compliant for warranty-safe upgrade
  • 5V low-voltage design reduces power consumption
  • 204-pin SODIMM fits HP ProBook 4330s 4331s 4340s 4421s 4430s
  • Easy DIY installation with OWC video guide

Tæknilýsing

BrandOWC
Part Number1S3D31R802GB
Capacity2GB
Type204-Pin DDR3 Non-ECC SODIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemHP ProBook 4330s
HP ProBook 4331s
HP ProBook 4340s
HP ProBook 4421s
HP ProBook 4430s

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How do I confirm the module is running at 1333 MHz CL9 after installation?

Open the BIOS or a system-information tool such as CPU-Z and verify the memory tab shows DDR3-1333 with CAS latency 9 and 1.5 V operation.

What comes in the box and what must I source separately?

The package contains one 2 GB 204-pin DDR3 SODIMM module; no tools, screws or additional components are included.

Which capacity should I choose for an HP ProBook 4330s?

This part is a single 2 GB module; add a second identical module if your ProBook 4330s has two slots and you want 4 GB total.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.