Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green 288-pin DDR4 ECC registered DIMM with black chips no heat spreader

OWC

OWC 2R4D42R816GB 16GB DDR4 2400 ECC RDIMM memory upgrade

SKU CH-TMWD-570XS

16GB DDR4 2400MHz ECC registered DIMM for Supermicro X10DRW-N, X10DRW-NT, X10DRX, X10DSC+ and X10QRH+ motherboards

  • Capacity16GB
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.2V
  • ECCYes

Capacity 16GB

  • 16GB
  • 32GB

Yfirstrikaðar útgáfur eru til, en ekki til hér.

  • ECC registered design protects data integrity in server workloads
  • 16GB capacity at 2400MHz expands memory bandwidth for demanding applications
  • CL17 latency at 1.2V balances speed with power efficiency
  • 288-pin RDIMM form factor fits Supermicro X10 series motherboards
  • 2Rx8 dual-rank organisation increases memory density per slot

16GB DDR4 2400 ECC RDIMM for Supermicro X10

This 16GB DDR4 2400MHz PC4-19200 CL17 registered ECC module is built for Supermicro X10 series server and workstation motherboards. It operates at 1.2V with a 2Rx8 rank configuration on a 288-pin form factor. The part targets administrators upgrading X10DRW-N, X10DRW-NT, X10DRX, X10DSC+ or X10QRH+ platforms.

Replaces Supermicro MEMDR416LCL06ER24 and similar

The module directly replaces Supermicro part numbers MEMDR416LCL06ER24, MEMDR416LHL03ER24 and MEMDR416LSV01ER24. The upgrade is worthwhile when expanding capacity on supported X10 boards or when a failed DIMM must be swapped with a validated equivalent. It cannot be mixed with unbuffered memory and will not function in standard desktop systems.

Verify motherboard model and memory population rules

Confirm the exact Supermicro motherboard model matches the listed X10 series before ordering. Registered ECC DIMMs require compatible chipset and BIOS support for ECC registered operation. Check the system manual for maximum supported capacity per slot and approved population configurations to ensure the 16GB module will be recognised.

Helstu kostir

  • ECC registered design protects data integrity in server workloads
  • 16GB capacity at 2400MHz expands memory bandwidth for demanding applications
  • CL17 latency at 1.2V balances speed with power efficiency
  • 288-pin RDIMM form factor fits Supermicro X10 series motherboards
  • 2Rx8 dual-rank organisation increases memory density per slot

Tæknilýsing

BrandOWC
Part Number2R4D42R816GB
Capacity16GB
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X10DRW-N
Supermicro Motherboard X10DRW-NT
Supermicro Motherboard X10DRX
Supermicro Motherboard X10DSC+
Supermicro Motherboard X10QRH+

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Does the 288-pin DDR4 RDIMM fit the Supermicro X10DRW-N motherboard?

Yes, the 288-pin DDR4 2400 ECC RDIMM is listed as compatible with the Supermicro X10DRW-N and four other X10 series motherboards.

What is the correct seating procedure for this registered ECC module?

Align the notch on the 288-pin module with the slot key, press down firmly until both side clips click, and verify the registered buffer is recognised in BIOS.

When should the 16 GB ECC RDIMM be replaced?

Replace the module if memory diagnostics report uncorrectable ECC errors or if the system fails to POST with this DIMM installed.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.