Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green circuit board with black memory chips and gold edge contacts

OWC

OWC 2R4D42R816GB 16GB DDR4 2400MHz ECC RDIMM memory upgrade

SKU CH-QHQN-6S6EG

16GB DDR4 2400MHz ECC registered RDIMM for Supermicro X10DGQ, X10DRD-L, X10DRC-T4+, X10DRFF, X10DRD-iNT server motherboards

  • Capacity16GB
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.2V
  • ECCYes
  • ECC protection prevents data corruption in server workloads
  • Registered design stabilises signal integrity on multi-module systems
  • 16 GB capacity expands memory headroom for virtualisation
  • 2400 MHz DDR4 speed matches Supermicro X10 platform specs
  • 2 V operation reduces power draw versus earlier DDR generations

Server DDR4 ECC RDIMM upgrade

This OWC 16GB DDR4 2400MHz PC4-19200 CL17 1.2V 288-pin ECC Registered RDIMM is built for Supermicro X10DGQ, X10DRD-L, X10DRC-T4+, X10DRFF and X10DRD-iNT motherboards. It targets administrators extending the life of existing server or workstation infrastructure.

Verify platform and memory rules

Confirm your board is one of the five listed Supermicro models before ordering. The module uses registered ECC technology and cannot be mixed with unbuffered memory or installed in standard desktop systems. Existing DIMM population and rank limits should be checked against the motherboard manual.

Thermals noise and power draw

The module operates at 1.2V with no heat spreader, relying on chassis airflow for cooling. Registered ECC DIMMs of this class typically run cool and silent under normal server workloads. Power draw per stick remains low, consistent with DDR4 2400MHz JEDEC specifications.

Helstu kostir

  • ECC protection prevents data corruption in server workloads
  • Registered design stabilises signal integrity on multi-module systems
  • 16 GB capacity expands memory headroom for virtualisation
  • 2400 MHz DDR4 speed matches Supermicro X10 platform specs
  • 2 V operation reduces power draw versus earlier DDR generations

Tæknilýsing

BrandOWC
Part Number2R4D42R816GB
Capacity16GB
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X10DGQ
Supermicro Motherboard X10DRD-L
Supermicro Motherboard X10DRC-T4+
Supermicro Motherboard X10DRFF
Supermicro Motherboard X10DRD-iNT

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

What comes in the box and is anything else required to install this 16GB DDR4 2400MHz ECC RDIMM?

The box contains one 288-pin DDR4 ECC registered DIMM. No extra parts are needed; install it directly into a compatible Supermicro motherboard DIMM slot.

How do I decide between the 16GB module and other capacities for my Supermicro X10 series board?

Choose the 16GB 2Rx8 module if your board supports 16GB per slot and you need ECC registered memory; add multiple modules to reach the total capacity your workload requires.

What does the PC4-19200 2400MHz CL17 rating mean once the module is running in a server?

It indicates a 2400MT/s data rate with CL17 latency at 1.2V, delivering the JEDEC-standard bandwidth and error-correction your X10 motherboard expects for stable operation.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.