Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Two green 240-pin DDR3 RDIMM modules, no heat spreaders

OWC

OWC 32GB (2x16GB) DDR3 1333 ECC Registered RDIMM memory upgrade for Dell PowerEdge R920 T410 T610 T710

SKU CH-VG0M-QZD2M

32 GB DDR3-1333 ECC registered RDIMM kit (2 × 16 GB, 1.5 V, CL9) for Dell PowerEdge R920, T410, T610 and T710 servers

  • Capacity32GB (2 x 16GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 32GB (2 x 16GB)

  • ECC registered design protects data integrity in servers
  • 32GB kit with two 16GB modules expands capacity
  • DDR3 1333 PC3-10600 CL9 matches system specs
  • 5V 240-pin RDIMM fits PowerEdge R920 T410 T610 T710
  • JEDEC and RoHS compliant for warranty-safe upgrades

Server ECC Registered DDR3 Kit

This OWC kit provides 32GB of DDR3 ECC registered memory as two 16GB modules. It is built for Dell PowerEdge R920, T410, T610 and T710 servers and workstations that require registered DIMMs. Standard desktop systems cannot use this memory type.

DDR3 1333 Registered Interface Limits

The modules run at DDR3 1333 (PC3-10600) with CL9 latency and 1.5V operation. Registered buffering adds a clock cycle for signal integrity, which is mandatory for the listed PowerEdge platforms. Mixing these DIMMs with unbuffered memory will prevent the system from booting.

240-Pin RDIMM Build and Daily Use

Each 240-pin DIMM uses a 2Rx4 organisation without a heat spreader, relying on server chassis airflow for cooling. JEDEC and RoHS compliance ensures a warranty-safe upgrade path. The kit suits administrators extending the service life of existing PowerEdge infrastructure.

Helstu kostir

  • ECC registered design protects data integrity in servers
  • 32GB kit with two 16GB modules expands capacity
  • DDR3 1333 PC3-10600 CL9 matches system specs
  • 5V 240-pin RDIMM fits PowerEdge R920 T410 T610 T710
  • JEDEC and RoHS compliant for warranty-safe upgrades

Tæknilýsing

BrandOWC
Part Number1R3D32R4032P
Capacity32GB (2 x 16GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemDell PowerEdge R920
Dell PowerEdge T410
Dell PowerEdge T610
Dell PowerEdge T710

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Should I pick the 32GB kit or buy single 16GB modules for my Dell PowerEdge?

The kit supplies two matched 16GB RDIMMs for a total of 32GB, which keeps channel balance intact and avoids mixing ranks that can cause boot issues on the R920, T410, T610 and T710.

What does the 1333MHz rating actually deliver inside a PowerEdge server?

At 1333MHz CL9 the modules run at the native DDR3-1333 data rate supported by the listed PowerEdge platforms, giving the rated throughput without down-clocking.

Will the 240-pin DDR3 ECC Registered interface work in my T610 without speed limits?

Yes, the 240-pin registered ECC design matches the T610 memory slots exactly, so the kit operates at the full 1333MHz specification.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.