Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Two green 240-pin DDR3 RDIMM modules in anti-static tray

OWC

OWC 32GB (2x16GB) DDR3 1333 PC3-10600 CL9 ECC Registered RDIMM Kit

SKU CH-2AWE-WFDNY

Two 16 GB DDR3 1333 CL9 ECC registered DIMMs add 32 GB to Dell PowerEdge C2100, C6105, M910, R810 and R910 servers

  • Capacity32GB (2 x 16GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 32GB (2 x 16GB)

  • ECC registered design protects data integrity in servers
  • 32GB kit with two 16GB modules expands capacity
  • DDR3 1333 PC3-10600 CL9 matches Dell PowerEdge specs
  • 5V JEDEC standard voltage ensures stable operation
  • Validated for PowerEdge C2100 C6105 M910 R810 R910

OWC 32 GB DDR3 ECC RDIMM Kit

This kit supplies 32 GB of DDR3 1333 ECC registered memory in two 16 GB modules. It is built for Dell PowerEdge servers such as the C2100, C6105, M910, R810 and R910. The modules will not work in standard desktop computers or alongside unbuffered DIMMs.

Capacity and headroom

Two 16 GB RDIMMs deliver 32 GB total, using 2Rx4 organisation at 1.5 V and CL9 latency. The registered design supports the higher densities that server mainboards expect, while the ECC function corrects single-bit errors. Workloads that exceed 32 GB or require faster than 1333 MT/s will need a different platform.

Build and connectors

Each module uses the 240-pin DDR3 DIMM form factor without a heat spreader, matching the OEM slot layout of the listed PowerEdge systems. JEDEC and RoHS compliance ensures electrical and mechanical fit. The lack of a spreader keeps the profile low for dense blade or rack chassis.

Helstu kostir

  • ECC registered design protects data integrity in servers
  • 32GB kit with two 16GB modules expands capacity
  • DDR3 1333 PC3-10600 CL9 matches Dell PowerEdge specs
  • 5V JEDEC standard voltage ensures stable operation
  • Validated for PowerEdge C2100 C6105 M910 R810 R910

Tæknilýsing

BrandOWC
Part Number1R3D32R4032P
Capacity32GB (2 x 16GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemDell PowerEdge C2100
Dell PowerEdge C6105
Dell PowerEdge M910
Dell PowerEdge R810
Dell PowerEdge R910

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Will the 2Rx4 registered DIMMs work with the existing unbuffered modules in my PowerEdge R810?

No, the 2Rx4 registered modules cannot be mixed with unbuffered memory; the system requires all slots to use registered ECC DIMMs.

How can I confirm the kit is running at 1333 MHz CL9 after installation?

Check the BIOS memory information or run a tool such as CPU-Z; it should report DDR3-1333 (PC3-10600) at CL9 timings.

Does the 32 GB kit include only the two 16 GB RDIMMs or are any cables or brackets supplied?

The package contains only the two 16 GB 240-pin DDR3 ECC registered DIMMs; no cables, brackets or additional hardware are included.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.