Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn

OWC

OWC 32GB (2x16GB) DDR3L 1600 ECC Registered RDIMM 1.35V memory upgrade

SKU CH-3P48-SSEN2

A 32 GB DDR3L ECC registered kit of two 16 GB modules at 1600 MHz for Cisco UCS B200 M3, B22 M3, B420 M3, C22 M3 and C220 M3 servers

  • Capacity32GB (2 x 16GB)
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • ECC registered design protects data integrity in servers
  • 32 GB kit (2×16 GB) expands Cisco UCS capacity
  • DDR3L 1600 CL11 matches factory speed specs
  • 35 V low-voltage operation reduces power draw
  • Validated for B200 M3, B22 M3, B420 M3, C22 M3, C220 M3

Server-grade DDR3L ECC RDIMM kit

This 32 GB kit contains two 16 GB DDR3L 1600 registered DIMMs with ECC and a CAS latency of CL11. It operates at 1.35 V and uses a 2Rx4 organisation on 240-pin modules. The memory is designed for Cisco UCS B200 M3, B22 M3, B420 M3, C22 M3 and C220 M3 servers and workstations.

Verify registered ECC support

Your system must accept DDR3L registered ECC RDIMMs; unbuffered or load-reduced modules will not work alongside this kit. Confirm the motherboard can run 1.35 V DDR3L at 1600 MT/s and that the memory controller supports 2Rx4 dual-rank modules. Check the server documentation for maximum capacity per channel and required population order before installing.

Steady throughput with ECC integrity under

Registered buffering reduces electrical load on the memory controller, helping maintain signal quality during prolonged workloads. ECC corrects single-bit errors on the fly, preventing silent data corruption in long-running database or virtualization tasks. The 1.35 V DDR3L voltage lowers power draw compared to standard DDR3, reducing thermal stress during sustained operation.

Helstu kostir

  • ECC registered design protects data integrity in servers
  • 32 GB kit (2×16 GB) expands Cisco UCS capacity
  • DDR3L 1600 CL11 matches factory speed specs
  • 35 V low-voltage operation reduces power draw
  • Validated for B200 M3, B22 M3, B420 M3, C22 M3, C220 M3

Tæknilýsing

BrandOWC
Part Number1R6T32R4032P
Capacity32GB (2 x 16GB)
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemCisco UCS B200 M3
Cisco UCS B22 M3
Cisco UCS B420 M3
Cisco UCS C22 M3
Cisco UCS C220 M3

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

What comes in the box and do I need anything else to install it?

The kit includes two 16GB DDR3L 1600 ECC Registered RDIMM modules; no extra parts are required for installation in a compatible Cisco UCS server.

How do I know if this 32GB kit is the right capacity for my Cisco UCS B200 M3?

Each module is 16GB 2Rx4 DDR3L 1600 CL11 1.35V; choose this kit when your server needs 32GB total across two populated DIMM slots.

What does the PC3L-12800 1600MHz CL11 rating mean once the memory is running in my Cisco UCS C220 M3?

It indicates DDR3L 1600 MT/s transfer rate, CAS latency 11 and 1.35V operation, matching the server's supported memory specification.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.