Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Four black DDR3 UDIMM modules without heat spreaders

OWC

OWC 32GB (4x8GB) DDR3 1600 CL11 1.5V Non-ECC UDIMM Kit

SKU CH-STRW-PW9B7

A 32 GB kit of four 8 GB DDR3 1600 CL11 1.5 V unbuffered desktop DIMMs for dual-channel upgrades

  • Capacity32GB (4 x 8GB)
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCNo
  • Buffered/RegisteredUnbuffered

Capacity 32GB (4 x 8GB)

  • 32 GB total capacity from four 8 GB modules
  • DDR3 1600 speed with CL11 latency for responsive multitasking
  • 5 V JEDEC-standard voltage ensures broad desktop compatibility
  • 240-pin unbuffered non-ECC DIMMs install easily in standard slots
  • 100 % JEDEC and RoHS compliant for a warranty-safe upgrade

Capacity and configuration

This OWC kit delivers 32GB of DDR3 memory in a four-module pack of 8GB each. It runs at 1600MHz with a CAS latency of 11 and operates at the standard 1.5V. The unbuffered, non-ECC DIMMs use the 240-pin form factor required by desktop and workstation platforms.

Who this suits and who should look elsewhere

The kit targets owners of desktop or workstation systems that accept DDR3 PC3-12800 modules and have four available slots. It is not suitable for laptops, servers requiring registered or ECC memory, or any platform built for a different DDR generation.

Deciding specification

The memory technology is DDR3; the modules will only fit and function in motherboards designed for that generation. Verify your board supports DDR3 1600 unbuffered non-ECC DIMMs before purchase.

Helstu kostir

  • 32 GB total capacity from four 8 GB modules
  • DDR3 1600 speed with CL11 latency for responsive multitasking
  • 5 V JEDEC-standard voltage ensures broad desktop compatibility
  • 240-pin unbuffered non-ECC DIMMs install easily in standard slots
  • 100 % JEDEC and RoHS compliant for a warranty-safe upgrade

Tæknilýsing

BrandOWC
Part Number1U6D32R8032S
Capacity32GB (4 x 8GB)
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ColorBlack
Heat SpreaderNo
Recommend UseDesktops
LED ColorNone

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How can I confirm the kit is running at 1600 MHz with CL11 after installation?

Enter the BIOS or UEFI and verify the memory frequency reads 1600 MHz and the CAS latency shows 11. CPU-Z or a similar tool inside the OS will display the same figures.

What does the 32 GB kit contain and is anything else required?

The kit includes four 8 GB DDR3 UDIMM modules. No extra cables, brackets or software are needed; install them directly into the motherboard DIMM slots.

Why choose the 32 GB (4×8 GB) version over a smaller capacity?

The 32 GB kit provides the maximum density for four-slot desktop boards that support 8 GB DDR3 modules, giving the highest total memory without mixing capacities.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.