Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Four green DDR3L ECC registered DIMMs with gold contacts

OWC

OWC 32GB (4x8GB) DDR3L 1600 CL11 ECC Registered RDIMM Supermicro X9QRi X9SRD

SKU CH-TGTM-VT1RX

32 GB DDR3L ECC registered memory kit in four 8 GB modules at 1600 MHz CL11 for Supermicro X9QRi and X9SRD servers

  • Capacity32GB (4 x 8GB)
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes

Capacity 32GB (4 x 8GB)

  • ECC registered design protects data integrity in server workloads
  • 32 GB kit (4 × 8 GB) expands memory capacity for virtualisation
  • DDR3L 1600 CL11 at 1.35 V lowers power draw versus standard DDR3
  • 240-pin RDIMM form factor fits Supermicro X9QRi and X9SRD motherboards
  • Replaces Supermicro MEMDR380LHL07ER16 and related part numbers

OWC 32GB DDR3L ECC RDIMM Kit

This 32GB kit contains four 8GB DDR3L 1600 CL11 registered DIMMs built for Supermicro X9QRi and X9SRD motherboards. It targets server and workstation administrators who need error-correcting memory for 240-pin DDR3L slots. Standard desktop boards cannot use these registered modules, and they must not be mixed with unbuffered memory.

Capacity and headroom

The four-module layout fills four DIMM slots with 32GB total, suited to virtualization hosts, NAS appliances and router platforms that benefit from ECC integrity. Workloads exceeding 32GB or requiring higher frequencies than 1600 MT/s will need a different platform or larger modules.

Build and daily implications

Modules lack heat spreaders, relying on chassis airflow in 1U or tower server enclosures. The 1.35V DDR3L voltage reduces power draw compared to standard DDR3. Each stick uses a 240-pin registered interface keyed for server boards only, so physical installation is limited to compatible Supermicro X9 series systems.

Helstu kostir

  • ECC registered design protects data integrity in server workloads
  • 32 GB kit (4 × 8 GB) expands memory capacity for virtualisation
  • DDR3L 1600 CL11 at 1.35 V lowers power draw versus standard DDR3
  • 240-pin RDIMM form factor fits Supermicro X9QRi and X9SRD motherboards
  • Replaces Supermicro MEMDR380LHL07ER16 and related part numbers

Tæknilýsing

BrandOWC
Part Number1R6T31R4032S
Capacity32GB (4 x 8GB)
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X9QRi Series
Supermicro Motherboard X9SRD Series

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Will the 1.35 V DDR3L RDIMMs run alongside existing 1.5 V DDR3 modules in my Supermicro X9SRD?

No, registered ECC DDR3L cannot be mixed with unbuffered or 1.5 V DDR3; the board requires all slots to use identical registered DDR3L modules.

How can I confirm the 32 GB kit is detected at 1600 MHz CL11 after installation?

Check the BIOS memory information screen — it should show 32 GB total, DDR3L 1600, CL11, 1.35 V, registered ECC on all four channels.

Does the kit include four 8 GB RDIMMs or do I need to buy extra sticks?

The upgrade kit contains four 8 GB DDR3L 1600 CL11 1Rx4 240-pin registered ECC modules; no additional memory is required.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.