Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green printed circuit board with black memory chips on both sides and gold edge contacts

OWC

OWC 32GB DDR4 2400 CL17 2Rx4 VLP 288-pin 1.2V ECC RDIMM 2R4V42R432GB

SKU CH-MEJD-19RHA

32 GB DDR4 ECC registered VLP RDIMM running at 2400 MT/s CL17 for Supermicro SuperBlade 6119PW-T3N, 6129P-C3N, 6129P-T3N, 6419P-C3N and 6419P-T3N servers

  • Capacity32GB
  • Type288-Pin DDR4 ECC VLP RDIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.2V
  • ECCYes
  • 32 GB capacity handles heavy server workloads
  • DDR4 2400 speed delivers 19200 MB/s bandwidth
  • CL17 latency keeps response times tight
  • ECC registered design protects data integrity
  • VLP 288-pin form fits Supermicro SuperBlade bays

Server ECC RDIMM

This OWC 32GB DDR4 2400 CL17 registered DIMM is built for Supermicro SuperBlade systems. It operates at 1.2V with a 2Rx4 rank configuration and 288-pin VLP form factor. The module provides error-correcting code memory for workloads that require data integrity. It is not compatible with standard desktop computers or unbuffered memory configurations.

Replaces Supermicro modules

This upgrade replaces Supermicro part numbers including MEMDR432LCL02ER24 and MEMDR432LSV01ER. The jump is worth it when extending the life of existing SuperBlade 6119PW-T3N, 6129P-C3N, 6129P-T3N, 6419P-C3N or 6419P-T3N infrastructure. Matching capacity, speed and manufacturer across all DIMMs ensures optimal performance.

Suits server administrators

This memory suits administrators upgrading compatible SuperBlade platforms with ECC registered requirements. Builders needing unbuffered, load-reduced or non-ECC memory should look elsewhere. Systems outside the listed SuperBlade models cannot use this registered VLP module.

Helstu kostir

  • 32 GB capacity handles heavy server workloads
  • DDR4 2400 speed delivers 19200 MB/s bandwidth
  • CL17 latency keeps response times tight
  • ECC registered design protects data integrity
  • VLP 288-pin form fits Supermicro SuperBlade bays

Tæknilýsing

BrandOWC
Part Number2R4V42R432GB
Capacity32GB
Type288-Pin DDR4 ECC VLP RDIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro SuperBlade 6119PW-T3N
Supermicro SuperBlade 6129P-C3N
Supermicro SuperBlade 6129P-T3N
Supermicro SuperBlade 6419P-C3N
Supermicro SuperBlade 6419P-T3N

Spurningar um þessa vöru

Does the 288-pin VLP RDIMM fit the Supermicro SuperBlade 6119PW-T3N memory slots?

Yes, the 288-pin VLP RDIMM is built for the Supermicro SuperBlade 6119PW-T3N and the other listed SuperBlade models.

Do I need to populate all channels or follow a specific slot order when installing this 32GB 2Rx4 module?

Install the module in the slot sequence recommended by the SuperBlade manual; mixing with unbuffered or load-reduced DIMMs is not supported.

When should the 1.2V DDR4 2400 ECC RDIMM be replaced in a 24/7 server workload?

Replace the module if ECC correctable-error counts rise sharply or if the system logs uncorrectable memory errors during sustained operation.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.