Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green circuit board with gold edge contacts and black memory chips

OWC

OWC 32GB DDR4 2400MHz PC4-19200 CL17 1.2V 288pin ECC Registered RDIMM memory upgrade

SKU CH-51X0-TQDC8

32 GB DDR4 ECC registered RDIMM at 2400 MHz CL17 for Supermicro X10 server boards

  • Capacity32GB
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.2V
  • ECCYes
  • 32 GB capacity lets servers handle larger workloads
  • DDR4 2400 MHz speed delivers PC4-19200 bandwidth
  • ECC registered design protects data integrity in critical tasks
  • 2 V operation reduces power draw per module
  • Validated for Supermicro X10DRW-N, X10DRW-NT, X10DRX, X10DSC+, X10QRH+

Server-grade DDR4 ECC RDIMM

This 32 GB DDR4 module is built for Supermicro X10 series motherboards including X10DRW-N, X10DRW-NT, X10DRX, X10DSC+ and X10QRH+. It targets administrators upgrading workstation or server platforms that require registered ECC memory. Standard desktop systems cannot use this module.

Registered ECC with CL17 latency

The single decisive specification is the registered ECC design combined with a CAS latency of 17 at DDR4 2400 speed. This combination ensures error correction and signal integrity for multi-socket server boards. Mixing with unbuffered DIMMs is not supported and will prevent boot.

288-pin 1.2 V form factor for dense configurations

Each stick uses the standard 288-pin DDR4 interface at 1.2 volts, allowing multiple modules to populate available DIMM slots without exceeding platform voltage limits. The lack of a heat spreader keeps height low for tight server chassis. Buyers needing non-ECC or unbuffered memory for consumer boards must choose a different product.

Helstu kostir

  • 32 GB capacity lets servers handle larger workloads
  • DDR4 2400 MHz speed delivers PC4-19200 bandwidth
  • ECC registered design protects data integrity in critical tasks
  • 2 V operation reduces power draw per module
  • Validated for Supermicro X10DRW-N, X10DRW-NT, X10DRX, X10DSC+, X10QRH+

Tæknilýsing

BrandOWC
Part Number2R4D42R432GB
Capacity32GB
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X10DRW-N
Supermicro Motherboard X10DRW-NT
Supermicro Motherboard X10DRX
Supermicro Motherboard X10DSC+
Supermicro Motherboard X10QRH+

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How does the 2400MHz speed affect real-world throughput in a server?

The module runs at DDR4 2400 with CL17 latency, delivering PC4-19200 bandwidth that the memory controller can sustain across registered DIMM slots.

What does the registered ECC interface mean for compatibility?

This is a 288-pin DDR4 ECC registered DIMM; it only works in systems that support registered memory and cannot be mixed with unbuffered modules.

Will the 2Rx4 32GB stick fit the Supermicro X10DRW-N memory slots?

Yes, the 288-pin RDIMM form factor matches the X10DRW-N, X10DRW-NT, X10DRX, X10DSC+ and X10QRH+ motherboards listed for this part.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.