Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green bare circuit board DDR4 ECC registered DIMM with black chips and gold contacts

OWC

OWC 32GB DDR4 3200 CL22 2Rx4 288-pin 1.2V ECC RDIMM Gigabyte R182-Z90/Z91/Z92/Z93 R262-ZA0

SKU CH-0A64-6Y3NW

32 GB DDR4 3200 ECC registered DIMM for Gigabyte R182-Z90/91/92/93 and R262-ZA0 servers

  • Capacity32GB
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS Latency22
  • Voltage1.2V
  • ECCYes

Capacity 32GB

  • ECC registered design protects data integrity in servers
  • 32GB single module expands capacity without mixing ranks
  • DDR4 3200 CL22 speed matches Gigabyte R182 and R262 specs
  • 2V JEDEC voltage keeps power draw low
  • Backward compatible with 2133, 2400, 2666 and 2933MHz systems

32GB DDR4 ECC RDIMM for Gigabyte servers

This 32GB DDR4 3200 CL22 2Rx4 288-pin 1.2V ECC Registered DIMM is built for the Gigabyte R182-Z90, R182-Z91, R182-Z92, R182-Z93 and R262-ZA0 platforms. It targets administrators upgrading workstation or server memory capacity with a single JEDEC-compliant module.

Registered ECC limits mixing and platform fit

The registered buffer and ECC function require a motherboard chipset that supports registered DIMMs; standard desktop boards will not POST with this module. It cannot be mixed with unbuffered or load-reduced DIMMs, and population rules may restrict which slots can be used together.

Verify slot count and maximum per channel

Before ordering, confirm how many DDR4 RDIMM slots your Gigabyte system exposes and the maximum supported capacity per channel. The module runs at 3200 MT/s but will down-clock to 2133, 2400, 2666 or 2933 MT/s if the platform dictates.

Helstu kostir

  • ECC registered design protects data integrity in servers
  • 32GB single module expands capacity without mixing ranks
  • DDR4 3200 CL22 speed matches Gigabyte R182 and R262 specs
  • 2V JEDEC voltage keeps power draw low
  • Backward compatible with 2133, 2400, 2666 and 2933MHz systems

Tæknilýsing

BrandOWC
Part Number3R2D42R432GB
Capacity32GB
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 3200 (PC4 25600)
CAS Latency22
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemGigabyte R182-Z90
Gigabyte R182-Z91
Gigabyte R182-Z92
Gigabyte R182-Z93
Gigabyte R262-ZA0

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Should I buy one 32GB module or two for my Gigabyte R182-Z90?

This listing is a single 32GB DDR4 3200 CL22 2Rx4 1.2V ECC Registered RDIMM. Add a second identical module only if your board has a free slot and the system manual confirms dual-channel support for registered DIMMs.

What does the 3200MHz rating actually deliver once installed in a Gigabyte R182-Z91?

The module runs at DDR4 3200 (PC4-25600) with CAS latency 22. If the platform only supports lower speeds it will down-clock automatically to 2933MHz, 2666MHz, 2400MHz or 2133MHz while keeping ECC and registered operation.

How does the 288-pin DDR4 ECC Registered interface limit what I can mix with this module?

The 288-pin DDR4 ECC Registered RDIMM keying prevents insertion into unbuffered or load-reduced slots. It must not be mixed with unbuffered or LRDIMM modules; only identical registered ECC DIMMs are supported in the same system.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.