Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green rectangular SODIMM circuit board with gold edge connector and black memory chips

OWC

OWC 4GB DDR3 1333 PC3-10600 CL9 2Rx8 204-pin 1.5V Non-ECC SODIMM memory upgrade for Dell Precision M6500

SKU CH-BGPG-9WG5Z

A 4 GB DDR3 SODIMM running at 1333 MHz with CL9 latency, built for the Dell Precision M6500

  • Capacity4GB
  • Type204-Pin DDR3 Non-ECC SODIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCNo

Capacity 4GB

  • Boost performance with 4GB DDR3 1333MHz module
  • JEDEC and ROHS compliant for warranty-safe upgrade
  • CL9 latency at 1.5V for stable operation
  • 204-pin SODIMM fits Dell Precision M6500
  • 2Rx8 unbuffered design enables easy DIY installation

OWC 4GB DDR3 SODIMM for Precision M6500

This module is a 4GB DDR3 1333 PC3-10600 CL9 2Rx8 204-pin 1.5V Non-ECC SODIMM built to upgrade the Dell Precision M6500. It arrives new and is tested to meet JEDEC and ROHS standards for a warranty-safe installation. The single stick adds 4GB of system memory in an easy DIY step.

Owners adding memory to a Precision M6500

The part suits anyone expanding a Precision M6500 with a compatible 4GB DDR3 SODIMM. Builders working on any other laptop, desktop or mini PC should verify their platform requires DDR3 1333 Non-ECC SODIMMs before ordering. Systems that need ECC, registered or a different voltage cannot use this module.

The 204-pin DDR3 1333 SODIMM form factor

The decisive specification is the 204-pin DDR3 1333 PC3-10600 SODIMM interface. The M6500 accepts this exact pin count, voltage and speed. A module with a different pin layout, generation or voltage will not fit or function in the target system.

Helstu kostir

  • Boost performance with 4GB DDR3 1333MHz module
  • JEDEC and ROHS compliant for warranty-safe upgrade
  • CL9 latency at 1.5V for stable operation
  • 204-pin SODIMM fits Dell Precision M6500
  • 2Rx8 unbuffered design enables easy DIY installation

Tæknilýsing

BrandOWC
Part Number1S3D32R804GB
Capacity4GB
Type204-Pin DDR3 Non-ECC SODIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemDell Precision M6500

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How do I install the 204-pin DDR3 SODIMM in my Dell Precision M6500, and what step is often missed?

Power off, unplug, and remove the battery. Open the memory door, align the notch on the 204-pin module with the slot key, insert at an angle, then press down firmly until both side clips click. The step often missed is fully seating the module so both clips engage.

What maintenance or replacement will this 4GB DDR3 1333 module need later?

No scheduled maintenance is required. The module has no heat spreader and uses standard 1.5V JEDEC DDR3. Replace only if a memory test reports errors or you need more than 4GB capacity for your workload.

What limit appears first during sustained heavy use on this CL9 1.5V DDR3 SODIMM?

The 1333 MT/s data rate and CL9 latency set the throughput ceiling. Under sustained load the memory controller reaches its maximum bandwidth before the module hits a thermal or voltage limit.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.