Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Two green DDR4 RDIMM modules, black chips, no heat spreader

OWC

OWC 64GB (2x32GB) DDR4 3200 CL22 ECC Registered RDIMM PowerEdge XE8545

SKU CH-JN4X-10ES9

A 64 GB DDR4 ECC registered kit running at 3200 MHz with CL22 latency for the PowerEdge XE8545 server

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.2V
  • ECCYes

Capacity 64GB (2 x 32GB)

  • ECC registered design protects data integrity in servers
  • 64 GB kit (2 × 32 GB) expands memory capacity
  • DDR4 3200 speed matches PowerEdge XE8545 specifications
  • 2 V operation reduces power draw per module
  • Replaces Dell part numbers for direct compatibility

Server Memory Upgrade Kit

This OWC kit delivers 64GB of DDR4 3200 ECC Registered memory in two 32GB modules. It is built for the Dell PowerEdge XE8545 server platform and operates at 1.2V with CL22 latency. The modules use 288-pin RDIMM form factor with 2Rx4 organisation. They are designed for workloads that require error correction and registered buffering.

Suited For Enterprise Servers

This memory suits administrators upgrading or repairing a PowerEdge XE8545 that specifically requires registered ECC RDIMMs. It will not work in standard desktop PCs or consumer workstations that accept only unbuffered non-ECC modules. Buyers who need load-reduced ECC memory or unbuffered DIMMs for other platforms should look elsewhere.

Verify Server Requirements

Confirm your PowerEdge XE8545 supports DDR4 3200 registered ECC RDIMMs with 2Rx4 rank configuration. Check that all existing DIMMs match this capacity, speed and registered type to avoid mixing incompatible modules. Ensure the system firmware is current for full compatibility with the 64GB kit.

Helstu kostir

  • ECC registered design protects data integrity in servers
  • 64 GB kit (2 × 32 GB) expands memory capacity
  • DDR4 3200 speed matches PowerEdge XE8545 specifications
  • 2 V operation reduces power draw per module
  • Replaces Dell part numbers for direct compatibility

Tæknilýsing

BrandOWC
Part Number3R2D42R4064P
Capacity64GB (2 x 32GB)
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemPowerEdge XE8545

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Does my Dell PowerEdge XE8545 need to support ECC registered RDIMM memory for this 64GB kit to work?

Yes, the kit is 288-pin DDR4 ECC registered RDIMM; it only works in systems that accept registered ECC memory and will not function in standard desktop or unbuffered slots.

Can I add these two 32GB modules alongside existing DDR4 3200 unbuffered DIMMs in the same server?

No, registered ECC modules cannot be mixed with unbuffered or load-reduced memory; all installed DIMMs must be the same registered ECC type.

How can I verify the kit is running at DDR4 3200 CL22 after installation?

Check the BIOS memory information or OS tools such as dmidecode; they should report 3200 MT/s speed, CL22 latency and registered ECC status for each 32GB module.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.