Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Two green DDR5 ECC registered RDIMM modules in anti-static tray

OWC

OWC 64GB (2x32GB) DDR5 5200 PC5-41600 CL42 2Rx4 ECC Registered RDIMM server RAM

SKU CH-F87B-09RPY

Dual-channel 64GB kit of DDR5 5200 ECC registered RDIMMs for compatible workstations and servers

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR5 ECC RDIMM
  • SpeedDDR5 5200 (PC5 41600)
  • CAS LatencyCL42
  • Voltage1.1V
  • ECCYes

Capacity 64GB (2 x 32GB)

  • ECC registered design protects data integrity in servers
  • 64 GB dual-channel kit doubles bandwidth for heavy workloads
  • DDR5 5200 speed with CL42 latency accelerates throughput
  • 1 V operation lowers power draw under load
  • JEDEC and RoHS compliant for warranty-safe upgrades

ECC Registered DDR5 for servers

This 64 GB kit delivers two 32 GB DDR5 5200 modules built to the PC5-41600 standard with CL42 latency. Each stick is a 288-pin registered DIMM operating at 1.1 V and organised as 2Rx4 with on-die ECC. The memory is designed for workstations, NAS appliances, servers and network switches that require registered ECC modules.

Replacing unbuffered or lower-capacity DDR5

The jump is worth it when a platform demands registered ECC and cannot accept unbuffered or load-reduced DIMMs. Moving from single-rank or non-ECC memory adds the error correction and signal buffering that multi-socket boards and mission-critical workloads expect. The dual-channel kit also doubles density per slot compared with 16 GB or 8 GB alternatives.

Fits registered-DIMM slots in qualified systems

Installation requires a motherboard or riser wired for 288-pin DDR5 RDIMMs and a BIOS that supports the JEDEC PC5-41600 speed grade. No heat spreader is fitted, so airflow across the modules must be provided by the chassis. The kit frees the remaining DIMM slots for further registered ECC expansion up to the platform limit.

Helstu kostir

  • ECC registered design protects data integrity in servers
  • 64 GB dual-channel kit doubles bandwidth for heavy workloads
  • DDR5 5200 speed with CL42 latency accelerates throughput
  • 1 V operation lowers power draw under load
  • JEDEC and RoHS compliant for warranty-safe upgrades

Tæknilýsing

BrandOWC
Part Number5R2D52R4064P
Capacity64GB (2 x 32GB)
Type288-Pin DDR5 ECC RDIMM
SpeedDDR5 5200 (PC5 41600)
CAS LatencyCL42
Voltage1.1V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Multi-channel KitDual Channel Kit
Heat SpreaderNo

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

What motherboard slot does the 288-pin ECC Registered DIMM fit?

It fits a DDR5 RDIMM slot; the 288-pin keying matches registered server boards.

Which DIMM pair installs first for dual-channel operation?

Populate the two slots assigned to the same memory channel — typically slot 1 and slot 3 — so the kit runs in dual-channel mode.

When should the registered DIMMs be replaced under sustained server load?

JEDEC-compliant DDR5 modules rated at 1.1 V are designed for continuous operation; replace only if ECC logs report uncorrectable errors.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.