Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Four green DDR3 RDIMM modules in anti-static tray

OWC

OWC 64GB (4x16GB) DDR3 1600 CL11 ECC Registered RDIMM memory upgrade

SKU CH-105B-SE1J2

64 GB DDR3 1600 ECC registered RDIMM kit with four 16 GB modules for Supermicro SuperWorkstation 5037A and 7047A systems

  • Capacity64GB (4 x 16GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCYes

Capacity 64GB (4 x 16GB)

  • ECC registered design protects data integrity in critical workloads
  • 64 GB kit (4 × 16 GB) expands capacity for virtualisation and large datasets
  • DDR3 1600 CL11 at 1.5 V matches Supermicro 5037A and 7047A specifications
  • 240-pin 2Rx4 registered modules install directly into supported workstation slots
  • Replaces Supermicro MEMDR316LSL03ER16 and MEMDR316LSV01ER16 part numbers

Target systems

This 64GB kit uses four 16GB DDR3 1600 registered ECC modules built for Supermicro SuperWorkstation 5037A and 7047A series. It suits administrators extending the life of those platforms or building replacement servers that require registered memory.

Platform constraints

Registered ECC RDIMMs operate only in workstation and server chipsets that support the registered signal buffer; they will not function in standard desktop boards. The modules cannot be mixed with unbuffered memory and require a platform qualified for DDR3 1600 at 1.5V.

Installation notes

Each 240-pin DIMM installs like any DIMM, but the registered design demands correct slot population order defined by the Supermicro manual. The most common error is placing these modules in a consumer board or mixing them with unbuffered sticks, which prevents the system from posting.

Helstu kostir

  • ECC registered design protects data integrity in critical workloads
  • 64 GB kit (4 × 16 GB) expands capacity for virtualisation and large datasets
  • DDR3 1600 CL11 at 1.5 V matches Supermicro 5037A and 7047A specifications
  • 240-pin 2Rx4 registered modules install directly into supported workstation slots
  • Replaces Supermicro MEMDR316LSL03ER16 and MEMDR316LSV01ER16 part numbers

Tæknilýsing

BrandOWC
Part Number1R6D32R4064S
Capacity64GB (4 x 16GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro SuperWorkstation 5037A Series
Supermicro SuperWorkstation 7047A Series

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Should I pick the 64GB kit or buy single 16GB modules instead?

The kit supplies four matched 16GB modules for a total of 64GB, which is the simplest way to fill four slots on a Supermicro SuperWorkstation 5037A or 7047A.

What does the 1600MHz CL11 rating deliver in a live system?

The modules run at DDR3 1600 (PC3-12800) with CL11 latency at 1.5V, giving the rated bandwidth and timing when installed in a compatible workstation.

Does the 240-pin registered ECC interface limit which boards can use it?

Yes — the 240-pin DDR3 ECC registered DIMMs are designed for workstation and server platforms such as the Supermicro SuperWorkstation 5037A and 7047A series and will not work in standard desktop boards.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.