Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Eight green circuit boards with gold edge connectors and black memory chips

OWC

OWC 64GB (8x8GB) DDR3L 1333 PC3L-10600 CL9 2Rx4 240-pin 1.35V ECC Registered RDIMM memory upgrade

SKU CH-GTXF-J3KPD

An 8-module kit adds 64GB of DDR3L 1333 ECC registered memory to Cisco UCS B200 M1 or C200 M1 servers

  • Capacity64GB (8 x 8GB)
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes

Capacity 64GB (8 x 8GB)

  • ECC registered design prevents data corruption in server workloads
  • 64GB total capacity across eight 8GB modules for high-density upgrades
  • DDR3L 1333 CL9 at 1.35V reduces power draw versus standard DDR3
  • 240-pin RDIMM form factor fits Cisco UCS B200 M1 and C200 M1 systems
  • Replaces Cisco part numbers N01M308GB2 UCSMR1X082RXA UCSMR2X082RXB UCSMR2X082RXC

Server Memory Kit

This OWC kit delivers 64GB of DDR3L ECC Registered memory across eight 8GB modules. It is built for Cisco UCS B200 M1 and C200 M1 servers that require registered DIMMs with error correction. Standard desktop motherboards cannot use this memory type.

Sustained Operation

Registered buffering and ECC functionality maintain data integrity during continuous server workloads. The 1.35V DDR3L voltage reduces power draw compared to standard DDR3 while running at 1333MHz with CL9 latency. Modules operate without heat spreaders in managed airflow environments.

Compatibility Check

Verify your system is a Cisco UCS B200 M1 or C200 M1 before ordering. This memory cannot be mixed with unbuffered or load-reduced DIMMs. Confirm the platform requires 240-pin DDR3L Registered modules and supports 2Rx4 rank configuration.

Helstu kostir

  • ECC registered design prevents data corruption in server workloads
  • 64GB total capacity across eight 8GB modules for high-density upgrades
  • DDR3L 1333 CL9 at 1.35V reduces power draw versus standard DDR3
  • 240-pin RDIMM form factor fits Cisco UCS B200 M1 and C200 M1 systems
  • Replaces Cisco part numbers N01M308GB2 UCSMR1X082RXA UCSMR2X082RXB UCSMR2X082RXC

Tæknilýsing

BrandOWC
Part Number1R3T32R4064K
Capacity64GB (8 x 8GB)
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemCisco UCS B200 M1
Cisco UCS C200 M1

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How much power does the 1.35 V DDR3L kit draw when the server runs all day?

Each module operates at 1.35 V, lower than standard DDR3, reducing overall power draw and heat output in the Cisco UCS chassis.

What must the buyer already own for this 8 x 8 GB registered ECC kit to work?

A Cisco UCS B200 M1 or C200 M1 server with free 240-pin DIMM slots that support registered ECC DDR3L memory.

Can these 2Rx4 CL9 modules run alongside older unbuffered DIMMs still installed in the system?

No, registered ECC memory cannot be mixed with unbuffered or load-reduced modules; all slots must use matching registered ECC DIMMs.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.