Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green printed circuit board with black memory chips and gold edge connectors

OWC

OWC 64GB DDR4 2933MHz CL21 ECC Registered RDIMM 288pin 1.2V 2Rx4 memory upgrade

SKU CH-W4Y0-2WYNE

64 GB DDR4 2933 MHz ECC registered DIMM for Supermicro X11DPFR-S, X11DPFR-SN, X11DPG-HGX2, X11DPG-OT-CPU and X11DPG-QT motherboards

  • Capacity64GB
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.2V
  • ECCYes

Capacity 64GB

  • 64 GB capacity expands server memory headroom
  • DDR4 2933 MHz CL21 speed supports high-throughput workloads
  • ECC registered design protects data integrity in critical tasks
  • 2 V operation reduces power draw per module
  • Validated for Supermicro X11DPFR-S, X11DPFR-SN, X11DPG-HGX2, X11DPG-OT-CPU, X11DPG-QT

64GB DDR4 2933MHz ECC Registered RDIMM

This is a 64GB DDR4 2933MHz CL21 ECC Registered RDIMM from OWC. It operates at 1.2V on a 288-pin interface and uses a 2Rx4 rank configuration. The module is designed for server and workstation platforms that require registered memory with error correction.

Compatibility and constraints

It fits Supermicro motherboards X11DPFR-S, X11DPFR-SN, X11DPG-HGX2, X11DPG-OT-CPU and X11DPG-QT. The module runs at 2933MHz and is backward compatible with 2133MHz, 2400MHz and 2666MHz systems. It will not work in standard desktop computers and cannot be mixed with unbuffered memory.

Registered ECC requirement

The single specification that decides fit is the registered ECC design. Your system must support DDR4 registered DIMMs with ECC; unbuffered or non-ECC platforms will not accept this module.

Helstu kostir

  • 64 GB capacity expands server memory headroom
  • DDR4 2933 MHz CL21 speed supports high-throughput workloads
  • ECC registered design protects data integrity in critical tasks
  • 2 V operation reduces power draw per module
  • Validated for Supermicro X11DPFR-S, X11DPFR-SN, X11DPG-HGX2, X11DPG-OT-CPU, X11DPG-QT

Tæknilýsing

BrandOWC
Part Number2R9D42R464GB
Capacity64GB
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X11DPFR-S
Supermicro Motherboard X11DPFR-SN
Supermicro Motherboard X11DPG-HGX2
Supermicro Motherboard X11DPG-OT-CPU
Supermicro Motherboard X11DPG-QT

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Does the 288-pin DDR4 RDIMM fit the DIMM slots on a Supermicro X11DPFR-S motherboard?

Yes, the 288-pin registered DIMM matches the DDR4 slots on the listed Supermicro X11DPF and X11DPG boards.

What is the correct way to seat the 64 GB module, and what step do builders often miss?

Align the module notch with the slot key, press down evenly until both side latches click, and verify the system reports the full 64 GB at 2933 MHz.

When should the ECC registered module be replaced in a server workload?

Replace the module if the platform ECC logger records recurring correctable errors or an uncorrectable error occurs.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.