Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green circuit board with gold edge connector and black memory chips

OWC

OWC 8GB DDR3 1333 ECC Registered RDIMM 2Rx4 1.5V PowerEdge R920 T410 T610 T710 memory upgrade

SKU CH-DKAK-PQGWT

8GB DDR3 1333 ECC Registered RDIMM for Dell PowerEdge R920, T410, T610, T710 servers

  • Capacity8GB
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 8GB

  • ECC registered design protects data integrity in servers
  • 1333 MHz DDR3 speed matches PC3-10600 specification
  • Single 8 GB module simplifies capacity planning
  • 240-pin RDIMM fits PowerEdge R920 T410 T610 T710
  • 5 V operation meets JEDEC standard

Server Memory Upgrade

This 8GB DDR3 ECC registered RDIMM is built for Dell PowerEdge R920, T410, T610 and T710 servers. It delivers 1333 MHz speed with CL9 latency at 1.5V for stable enterprise workloads. The module uses a 240-pin form factor and 2Rx4 rank organisation. It is designed for IT professionals maintaining or expanding compatible rack and tower platforms.

Compatibility Constraints

This memory will not work in standard desktop computers or consumer motherboards. It cannot be mixed with unbuffered or non-ECC modules in the same system. The registered design requires a server or workstation chipset that supports ECC RDIMM operation. Buyers needing memory for a regular PC, laptop or gaming rig should look elsewhere.

Critical Specification

The registered ECC DDR3 1333 specification is the single factor that determines fit. Only systems qualified for PC3-10600 CL9 1.5V registered DIMMs can use this module. Verify your server documentation lists this exact configuration before purchase.

Helstu kostir

  • ECC registered design protects data integrity in servers
  • 1333 MHz DDR3 speed matches PC3-10600 specification
  • Single 8 GB module simplifies capacity planning
  • 240-pin RDIMM fits PowerEdge R920 T410 T610 T710
  • 5 V operation meets JEDEC standard

Tæknilýsing

BrandOWC
Part Number1R3D32R408GB
Capacity8GB
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemDell PowerEdge R920
Dell PowerEdge T410
Dell PowerEdge T610
Dell PowerEdge T710

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Should I pick the 8GB DDR3 1333 module or a different capacity for my Dell PowerEdge T610?

This listing is for a single 8GB DDR3 1333 ECC Registered RDIMM. Check your server's maximum supported memory and available DIMM slots to decide how many 8GB modules you need.

What does the PC3-10600 1333MHz rating mean once the module is installed in a PowerEdge R920?

The module will run at up to 1333 MT/s with CL9 latency, delivering the standard DDR3 1333 bandwidth your R920's memory controller expects for registered ECC DIMMs.

Is the 240-pin DDR3 ECC Registered interface compatible with my T410, and what does it limit?

Yes, the 240-pin DDR3 ECC Registered RDIMM matches the T410's registered memory requirement; it cannot be mixed with unbuffered modules and will operate at 1.5V.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.