Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn

OWC

OWC 8GB DDR3L 1600 CL11 1Rx4 ECC RDIMM memory upgrade

SKU CH-8Y1Y-A2GRG

8GB DDR3L 1600 ECC registered DIMM for Supermicro SuperWorkstation 7037A, 7047AX and 7047GR systems

  • Capacity8GB
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes

Capacity 8GB

Yfirstrikaðar útgáfur eru til, en ekki til hér.

  • ECC registered design protects data integrity in servers
  • DDR3L 1600 CL11 speed matches Supermicro workstation specs
  • 35 V low voltage reduces power draw in 24/7 systems
  • Single 8 GB 1Rx4 module simplifies capacity expansion
  • Replaces Supermicro MEMDR380L part numbers for guaranteed fit

8 GB DDR3L ECC RDIMM for Supermicro workstations

This 8 GB DDR3L 1600 CL11 module is a registered ECC DIMM built for Supermicro SuperWorkstation 7037A, 7047AX and 7047GR systems. It operates at 1.35 V and uses a 240-pin form factor with a 1Rx4 organisation. The part replaces Supermicro MEMDR380LHL07ER16, MEMDR380LSL10ER16, MEMDR380LSL14ER16 and MEMDR380LSV04ER16 modules.

Sustained-load behaviour with registered ECC

Registered buffering reduces electrical load on the memory controller, allowing stable operation when all slots are populated in multi-socket servers. ECC corrects single-bit errors on the fly, preventing silent data corruption during long compute runs. The low 1.35 V DDR3L voltage limits heat output, helping the module maintain rated CL11 timing under continuous utilisation.

Compatibility constraint: registered ECC only

This module will not work in standard desktop motherboards or any platform that requires unbuffered non-ECC memory. It also cannot be mixed with unbuffered DIMMs in the same system. Buyers needing memory for consumer PCs or laptops must select a different product.

Helstu kostir

  • ECC registered design protects data integrity in servers
  • DDR3L 1600 CL11 speed matches Supermicro workstation specs
  • 35 V low voltage reduces power draw in 24/7 systems
  • Single 8 GB 1Rx4 module simplifies capacity expansion
  • Replaces Supermicro MEMDR380L part numbers for guaranteed fit

Tæknilýsing

BrandOWC
Part Number1R6T31R408GB
Capacity8GB
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Heat SpreaderNo
Compatible SystemSupermicro SuperWorkstation 7037A Series
Supermicro SuperWorkstation 7047AX Series
Supermicro SuperWorkstation 7047GR Series

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How much power does the 1.35 V DDR3L module draw when the workstation runs continuously?

The module operates at 1.35 V, which is lower than standard DDR3 voltage, reducing overall power draw and heat output during all-day workloads.

What must the Supermicro SuperWorkstation already have for this 240-pin ECC RDIMM to function?

The system must support DDR3L 1600 registered ECC memory and provide a 240-pin DIMM slot; it cannot accept unbuffered modules.

Can this CL11 registered stick sit alongside older unbuffered DDR3 DIMMs in the same Supermicro chassis?

No, registered ECC memory cannot be mixed with unbuffered memory; all slots must use registered ECC modules for stable operation.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.