Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Square black PVC mesh filter sheet with magnetic strips for custom sizing

PANO-MOUNTS 50MFIL 500x500mm Magnetic PVC Dustproof Mesh Filter Fan Accessory

SKU CH-0CC9-XRR80 MPN 50MFIL

A 500 × 500 mm PVC mesh filter with 1 mm holes and a 118-inch magnetic strip lets you cut custom dust covers for PC cases, fans, speaker grills and other electronics while maintaining airflow

  • Product name50MFIL PANO-MOUNTS
  • certificationtrue, not_applicable
  • includedfalse
  • weight0.408 kilograms
  • descriptionPANO-MOUNTS, 50MFIL, 1.95 L x 0 W x 1.95 H inches
  • finishBlack
  • 1mm mesh holes maintain airflow while blocking dust
  • 500×500mm cuttable PVC sheet fits custom sizes
  • 118-inch magnetic strip enables tool-free attachment
  • 45mm heat-resistant PVC withstands high temperatures
  • Black finish suits PC cases, speaker grills, consoles

Magnetic PVC Mesh Filter 500x500mm

The PANO-MOUNTS 50MFIL is a cuttable magnetic dust filter made from 0.45mm thick PVC with 1mm mesh holes. It measures 500x500mm and includes a 118 inch magnetic strip for tool-free attachment to ferrous surfaces. The mesh balances dust capture with airflow for PC cases, fan intakes, speaker grilles and similar electronics. Weighs 0.408 kilograms.

Check mounting surface and cut dimensions

Verify that the chassis or device panel is made of ferromagnetic metal so the magnetic strip will hold. Measure the exact opening you need to cover before cutting the 500x500mm sheet and the supplied strip. The material can be trimmed with scissors or a knife to fit multiple smaller areas. Ensure the 1mm hole size suits your dust-prevention needs.

Suits DIY builders wanting custom-fit dust

Ideal for enthusiasts who need a single large sheet they can cut to various sizes for cases, consoles, speaker cabinets or other ventilated enclosures. Not suited for buyers who need a pre-sized, ready-to-install filter for a specific fan mount. Not suited for installations on non-magnetic aluminium, plastic or glass panels without additional fasteners.

Helstu kostir

  • 1mm mesh holes maintain airflow while blocking dust
  • 500×500mm cuttable PVC sheet fits custom sizes
  • 118-inch magnetic strip enables tool-free attachment
  • 45mm heat-resistant PVC withstands high temperatures
  • Black finish suits PC cases, speaker grills, consoles

Tæknilýsing

BrandPANO-MOUNTS
Model50MFIL
Product name50MFIL PANO-MOUNTS
certificationtrue, not_applicable
includedfalse
weight0.408 kilograms
descriptionPANO-MOUNTS, 50MFIL, 1.95 L x 0 W x 1.95 H inches
finishBlack
ColorBlack
dimensions6.35 cm x 6.35 cm x 53.34 cm

Spurningar um þessa vöru

Does the 500x500mm mesh arrive pre-cut or do I need to trim it to fit my case?

The filter is supplied as a full 500x500mm sheet that you cut to the exact size you need. A 3 m magnetic strip with adhesive backing is included separately so you can attach the trimmed edges to any ferrous surface.

Which mesh-hole size should I choose for maximum airflow while still blocking dust?

This model uses a 1 mm hole diameter. The larger opening reduces airflow restriction compared with finer meshes while still catching dust and hair.

How much does the 0.45 mm PVC layer reduce fan performance in a typical build?

The 1 mm openings are designed to keep static-pressure loss minimal. The 0.45 mm thick PVC adds negligible resistance, so case fans maintain near-rated airflow while the filter stops particulates.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.