Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Compact 10.1 inch industrial all-in-one with flat IP65 front panel, aluminium fanless chassis, multi-touch screen, dark grey finish

partaker

partaker A18 10.1" all-in-one PC J6413 16GB DDR4 256GB

SKU CH-0SMH-PCHWA

Compact 10.1" industrial all-in-one PC with IP65 front panel, Celeron J6413 processor, 16GB DDR4 memory, 256GB SSD, Windows 11 Pro, and fanless aluminium cooling

  • Form FactorAll-in-One
  • Operating SystemWindows 11 Pro
  • CPU TypeCeleron
  • GPU/VGA TypeIntel UHD Graphics
  • Memory Capacity16GB DDR4
  • Maximum Memory Supported32 GB

CPU Type Celeron

Memory Capacity 16GB DDR4

SSD 256GB

  • IP65 front panel resists dust and water jets
  • Fanless aluminium cooling runs silently in noise-sensitive areas
  • 1" 1280 x 800 multi-touch screen enables direct interaction
  • 9-36 V DC Phoenix input suits industrial power systems
  • Windows 11 Pro pre-installed for immediate deployment

Compact Industrial Panel PC

The Partaker A18 is a 10.1-inch all-in-one computer with an IP65-rated front panel and a multi-touch capacitive screen. It runs on an Intel Celeron J6413 processor with 16GB of DDR4 memory and a 256GB SATA SSD. Windows 11 Pro comes pre-installed for immediate deployment in industrial environments.

Fanless Upgrade for Legacy Panels

This unit replaces older panel PCs that rely on active cooling and lower IP ratings. The aluminium alloy fanless design enables silent 24/7 operation across a 9-36V wide voltage input. The jump is worth it when a project demands dust and water resistance at the front, legacy serial connectivity, and an operating range down to -20°C with an industrial SSD.

SATA Storage and 1GbE Network Limits

Storage expands through one M.2 2280 SATA slot and one 2.5-inch SATA bay with RAID 0/1 support, but the interface caps throughput at SATA speeds. Networking uses two Intel 1000M LAN ports, limiting wired bandwidth to 1Gbps. Wireless requires a separate Mini PCIe module, and the single SODIMM slot maxes out at 32GB of DDR4-2400 memory.

Helstu kostir

  • IP65 front panel resists dust and water jets
  • Fanless aluminium cooling runs silently in noise-sensitive areas
  • 1" 1280 x 800 multi-touch screen enables direct interaction
  • 9-36 V DC Phoenix input suits industrial power systems
  • Windows 11 Pro pre-installed for immediate deployment

Tæknilýsing

ModelA18-New-J6412-16G256G
Form FactorAll-in-One
Operating SystemWindows 11 Pro
CPU TypeCeleron
GPU/VGA TypeIntel UHD Graphics
Memory Capacity16GB DDR4
Maximum Memory Supported32 GB
SSD256GB
HDDNo
Screen Size10.1"
TouchscreenYes

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

What cut-out size does the 10.1" IP65 front panel need for embedded mounting?

The embedded installation cut-out is 262 x 180 mm, matching the 271.5 x 190 x 53 mm overall dimensions.

Which step is often missed when fitting the fanless aluminium chassis into a cabinet?

Ensure adequate surface air flow around the 53 mm deep unit; the fanless design relies on passive convection through the aluminium alloy body.

What storage upgrades are possible later on the M.2 2280 and 2.5" SATA bays?

One M.2 2280 SATA SSD and one 2.5" SATA SSD or HDD are supported, with RAID 0/1 available across the two drives.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.