Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Rectangular nickel-plated copper water block with clear acrylic top, aluminium cover plate and digital-RGB lighting

Phanteks

Phanteks Glacier G4090 GIGABYTE PH-GB4090GB_CR01_BP diy cooling

SKU CH-9W93-EFW8A MPN PH-GB4090GB_CR01_BP

Full-cover water block cools GIGABYTE AORUS MASTER and GAMING RTX 4090 cards with 10 mm copper base and digital RGB sync

  • TypeVGA Block & Cooler
  • Block Dim.11.51 x 4.94 x 1 in (292.31 x 125.47 x 26 mm)
  • Block MaterialAluminum
  • Full-coverage water block cools entire PCB directly
  • Nickel-plated copper base transfers heat efficiently
  • Digital-RGB lighting synchronises with Phanteks D-RGB and motherboard Addressable RGB
  • Viton rubber washers maintain seal force to prevent leaks
  • Designed for GIGABYTE AORUS MASTER and GAMING RTX 4090 cards

Full-Cover Water Block for Gigabyte RTX 4090

The Phanteks Glacier G4090 GIGABYTE water block fits the AORUS MASTER and GAMING RTX 4090 cards. A 10 mm copper base contacts the GPU die while the aluminium cover spans the full PCB. Digital-RGB lighting syncs with Phanteks D-RGB gear and motherboard addressable headers. Block dimensions are 11.51 x 4.94 x 1 in (292.31 x 125.47 x 26 mm).

Upgrade from air cooling when thermals throttle

Swapping the stock cooler for this full-cover block removes the factory heatsink and fans, replacing them with a direct-die copper cold plate and extended fin array. The Viton rubber washers maintain seal force under pressure cycles. The jump is worth it when sustained loads push the card past its thermal target and you have a custom loop ready.

Loop flow and clearance set the practical limits

The block adds 26 mm to the card profile, so case and motherboard spacing must accommodate the extra height. Digital-RGB control requires a 5 V addressable header or a Phanteks D-RGB controller. Fittings are not included; buyers must supply compatible G1/4 ports and tubing. First listed by the manufacturer in 2023.

Helstu kostir

  • Full-coverage water block cools entire PCB directly
  • Nickel-plated copper base transfers heat efficiently
  • Digital-RGB lighting synchronises with Phanteks D-RGB and motherboard Addressable RGB
  • Viton rubber washers maintain seal force to prevent leaks
  • Designed for GIGABYTE AORUS MASTER and GAMING RTX 4090 cards

Tæknilýsing

BrandPhanteks
ModelGlacier G4090 GIGABYTE Water Block Bundle
Part NumberPH-GB4090GB_CR01_BP
TypeVGA Block & Cooler
Block Dim.11.51 x 4.94 x 1 in (292.31 x 125.47 x 26 mm)
Block MaterialAluminum
Sendingarþyngd2.04 kg
Stærð sendingar356 × 191 × 76 mm

Spurningar um þessa vöru

Will the 292.31 mm by 125.47 mm block clear the mounting holes on my GIGABYTE AORUS MASTER RTX 4090?

Yes, the water block is designed specifically for that card and covers the full PCB, so the mounting pattern matches the AORUS MASTER and GAMING models.

Which step do builders most often miss when fitting the nickel-plated copper base to the GPU die?

Many forget to remove the protective film from the copper cold plate before applying thermal paste, which prevents proper contact and leads to high temperatures.

How often should the Viton rubber washers be replaced to keep the seal reliable?

Inspect the washers each time the loop is drained; replace them if they show any flattening or cracking, typically every two to three years in continuous use.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.