Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Gray triple-fan graphics card with black accents and PCIe 5.0 connector

PNY Technologies, Inc.

PNY Technologies, Inc. KMR507TN5LGGT3A GeForce RTX 5070 Ti 16GB GDDR7 graphics card

SKU CH-QK4Y-Z4R5M MPN KMR507TN5LGGT3A

GeForce RTX 5070 Ti graphics card with 16 GB GDDR7 memory, 8960 CUDA cores and boost clock of 2572 MHz

  • InterfacePCI Express 5.0 x16
  • Chipset ManufacturerNVIDIA
  • GPUGeForce RTX 5070 Ti
  • ArchitectureBlackwell
  • Core Clock2295 MHz
  • Boost Clock2572 MHz
  • 16 GB GDDR7 memory on a 256-bit bus for high bandwidth
  • 8960 CUDA cores built on the Blackwell architecture for parallel performance
  • Boost clock reaches 2572 MHz for responsive gaming and compute
  • PCI Express 5.0 x16 interface provides modern platform bandwidth
  • Triple-fan cooler handles a 300 W thermal design power within a 2.98-slot form factor

PNY OC GeForce RTX 5070 Ti 16GB

This PNY OC GeForce RTX 5070 Ti graphics card delivers 16GB of GDDR7 memory on a 256-bit interface for high-resolution gaming and creative workloads. The Blackwell architecture GPU runs at a 2295 MHz core clock and a 2572 MHz boost clock with 8960 CUDA cores. It connects via PCI Express 5.0 x16 and supports DirectX 12 Ultimate and OpenGL 4.6. Four simultaneous displays are supported at up to 7680 x 4320 resolution.

Triple-fan ATX card with 12VHPWR power

The ATX form factor card measures 11.8 x 4.73 x 2.35 inches and occupies 2.98 slots with a triple-fan cooler in a gray finish. A single 16-pin 12VHPWR connector supplies power; the required adapter is not included in the box. Display outputs comprise one HDMI 2.1b port and three DisplayPort 2.1b connectors for modern high-refresh-rate monitors. The board draws a 300 W thermal design power under load.

Check PSU wattage and case clearance

Verify that your power supply meets the 750 W recommended wattage and provides a native 12VHPWR connector or a compatible adapter. Ensure the chassis can accommodate a 300 mm maximum GPU length and the 2.98-slot thickness without blocking adjacent slots or cables. Supported operating systems include Windows 11 64-bit, Windows 10 64-bit from November 2018 onward, and Linux 64-bit.

Helstu kostir

  • 16 GB GDDR7 memory on a 256-bit bus for high bandwidth
  • 8960 CUDA cores built on the Blackwell architecture for parallel performance
  • Boost clock reaches 2572 MHz for responsive gaming and compute
  • PCI Express 5.0 x16 interface provides modern platform bandwidth
  • Triple-fan cooler handles a 300 W thermal design power within a 2.98-slot form factor

Tæknilýsing

BrandPNY
SeriesOC
ModelKMR507TN5LGGT3A
InterfacePCI Express 5.0 x16
Chipset ManufacturerNVIDIA
GPUGeForce RTX 5070 Ti
ArchitectureBlackwell
Core Clock2295 MHz
Boost Clock2572 MHz
CUDA Cores8960
Memory Size16GB
Memory Interface256-Bit
Memory TypeGDDR7
DirectXDirectX 12 Ultimate
OpenGLOpenGL 4.6
Multi-Monitor Support4
HDMI1 x HDMI 2.1b
DisplayPort3 x DisplayPort 2.1b
ColorGray
Max Resolution7680 x 4320
CrossFireX SupportNo
SLI SupportNo
CoolerTriple Fans
Operating Systems SupportedMicrosoft Windows®?11 64-bit, Windows 10 (November 2018 or later) 64-bit, Linux 64-bit ‍👉Check gaming pc with Windows 11 Pro
Thermal Design Power300W
Recommended PSU Wattage750W
Power Connector1 x 16-Pin
HDCP ReadyYes
FeaturesNVIDIA Blackwell Architecture
16GB GDDR7 Memory
3x Display Port 1x HDMI
8,960 CUDA® Cores
300 W Thermal Design Power
Form FactorATX
Max GPU Length300 mm
Card Dimensions (L x H)11.8 x 4.73 x 2.35 inch
Slot Width2.98 Slots
Sendingarþyngd1.34 kg
Stærð sendingar368 × 114 × 114 mm

Spurningar um þessa vöru

Does the PCI Express 5.0 x16 interface cap the card at 5.0 speeds on a 4.0 motherboard?

The card will run at PCI Express 4.0 speeds when installed in a 4.0 slot; full 5.0 bandwidth requires a 5.0 motherboard and CPU.

Will the 11.8 inch length and 2.98 slot width fit in a mid tower case with a 300 mm GPU clearance limit?

At 11.8 inches long and 2.98 slots thick the card matches a 300 mm clearance limit exactly; verify your case has no front radiator or cable obstruction at that depth.

How do I connect the single 16 pin power connector without melting the plug?

Use a native 12VHPWR cable from a 750W or larger PSU, seat the connector until the latch clicks, and avoid sharp bends within 30 mm of the plug.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.