Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green circuit board with four optical transceivers and gold PCIe edge connector

QLogic Corp.

QLogic Corp. QLE2694-SR 16Gb Quad Port FC PCIe Gen3 x16 network card

SKU CH-TPNC-2MKFK MPN QLE2694-SR

A 16 Gbps quad-port Fibre Channel HBA with a PCIe Gen3 x16 interface for high-throughput storage networks

  • Quad-port design expands SAN connectivity with four fibre-channel links
  • 16 Gbps per port delivers high-throughput storage traffic
  • PCIe Gen3 x16 interface maximises bandwidth and minimises latency
  • Backward-compatible speeds support 8 Gbps and 4 Gbps environments
  • Broad OS and server compatibility simplifies enterprise integration

Quad Port 16Gbps Fibre Channel HBA

The QLogic QLE2694-SR is a Fibre Channel host bus adapter with four ports, each running at up to 16Gbps. It connects through a PCI Express Gen3 x16 slot to deliver high-throughput storage networking. The card is built for enterprise SAN environments that require reliable, low-latency connectivity. Its quad-port design consolidates multiple links into a single expansion slot.

Suited for multi-port SAN hosts.

This adapter targets servers that need four independent Fibre Channel connections from one PCIe slot. It fits data-centre hosts attaching to redundant fabrics or scaling port density without consuming extra slots. Buyers needing only one or two ports should consider a dual-port or single-port HBA instead. The Gen3 x16 interface also requires a compatible motherboard or riser.

PCIe Gen3 x16 slot required for full performance

The card installs in a PCI Express Gen3 x16 slot to achieve its rated throughput. A smaller or slower slot will limit bandwidth and may prevent the adapter from operating correctly. Verify that the target server provides a physical x16 slot wired for Gen3 speeds before purchase. No other specification determines fit as decisively as the slot interface.

Helstu kostir

  • Quad-port design expands SAN connectivity with four fibre-channel links
  • 16 Gbps per port delivers high-throughput storage traffic
  • PCIe Gen3 x16 interface maximises bandwidth and minimises latency
  • Backward-compatible speeds support 8 Gbps and 4 Gbps environments
  • Broad OS and server compatibility simplifies enterprise integration

Tæknilýsing

BrandQLogic
ModelQLE2694-SR
Part NumberQLE2694-SR

Spurningar um þessa vöru

Will the PCIe Gen3 x16 slot saturate before the four 16Gbps ports reach full speed?

The Gen3 x16 link provides enough bandwidth for all four ports at 16Gbps, so the bus will not be the first limit.

How much heat and noise should I expect when all four ports run continuously?

The card is passively cooled and designed for sustained enterprise workloads, so it runs silently within standard server airflow.

What cabling and transceivers do I need to connect the QLE2694-SR to my SAN?

Each port uses a short-wave SFP+ transceiver and OM3 or OM4 multimode fibre with LC connectors.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.