Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Flat orange flex cable with 22-pin and 15-pin ends, 200mm long

Raspberry Pi

Raspberry Pi SC1131 DSI Display Cable 200mm 22Pin to 15Pin

SKU CH-BTFD-6F69X

A 200 mm flexible flat cable that connects a Raspberry Pi 5 DSI port to a 15-pin display

  • Connects Raspberry Pi 5 to DSI displays with 22-pin to 15-pin interface
  • 200 mm flexible cable fits tight enclosures without strain
  • Official Raspberry Pi accessory ensures correct pinout and signal integrity
  • DSI-specific design prevents accidental CSI connection damage
  • Part number SC1131 identifies the exact cable for Pi 5 display projects

Official Raspberry Pi 5 Display Cable

This 200mm flexible flat cable connects the Raspberry Pi 5 DSI port to compatible display screens. It bridges the 22-pin connector on the board to the 15-pin input found on many DSI panels. The cable is an official accessory designed for maker and IoT edge projects.

22-pin to 15-pin DSI connector

The single specification that determines fit is the pin-count translation from 22 pins on the Pi 5 side to 15 pins on the display side. DSI and CSI cables are not interchangeable, so this cable only works with DSI display screens. Verify your panel uses a 15-pin DSI interface before purchasing.

200mm length for compact builds

At 200mm the cable suits tight enclosures and short-run connections between the board and screen. It handles standard DSI display links within that reach but runs out for larger chassis or remote-mounted panels needing a longer run. Builders needing more length must source a different cable.

Helstu kostir

  • Connects Raspberry Pi 5 to DSI displays with 22-pin to 15-pin interface
  • 200 mm flexible cable fits tight enclosures without strain
  • Official Raspberry Pi accessory ensures correct pinout and signal integrity
  • DSI-specific design prevents accidental CSI connection damage
  • Part number SC1131 identifies the exact cable for Pi 5 display projects

Tæknilýsing

Engin birt tæknilýsing fyrir þessa vöru enn.

Spurningar um þessa vöru

What does the 200 mm length mean once the cable is installed?

It gives you a 200 mm reach between the Raspberry Pi 5's 22-pin DSI port and a 15-pin display connector, allowing flexible placement inside a case or on a bench.

How does the 22-pin to 15-pin DSI interface limit what I can connect?

The cable carries only DSI display signals and is keyed for 22-pin host to 15-pin panel; it cannot be used for CSI cameras or mixed with other pinouts.

What physical space and mounting does the 200 mm FPC need to fit?

The flat flexible cable bends to route inside enclosures and plugs straight into the 22-pin DSI header on the Pi 5 and the 15-pin socket on the display.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.