Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Grey ATX power supply unit with single fan and cable bundle

Replace Power

Replace Power RPSU-C99-69 420W ATX power supply

SKU CH-9KXM-DC6D2 MPN RPSU-C99-69

420W ATX power supply with 80mm cooling fan, switchable 110V/220V input, and connectors including 20+4 pin ATX, 12V ATX, SATA, and multiple peripheral leads

  • ColorGrey
  • TypeATX
  • Fans1
  • Weight0.1
  • 420W output powers compatible eMachines desktops reliably
  • Switchable 110V or 220V input suits different mains voltages
  • 20+4 pin ATX connector fits both 20-pin and 24-pin motherboards
  • One SATA connector plus multiple peripheral plugs support drives and accessories
  • Single 80mm fan cools the unit while it runs

Replacement 420W ATX Power Supply

This Replace Power unit delivers 420W through a standard ATX form factor with a single 80mm fan. It is built as a direct replacement for several eMachines desktop models including the W2646, W1700, T6542, T6522, T5234 and T5086. The grey chassis houses a switchable input voltage design.

Compatibility checks before ordering

Verify that your chassis accepts a standard ATX power supply and that the 110V or 220V input switch matches your mains supply. Confirm your motherboard uses a 20-pin or 24-pin main power connector and that your drives require SATA or large peripheral power plugs. The cable lengths are fixed at 15-inch for SATA and ATX leads, 14-inch for the 12V ATX lead, and 6-inch for the peripheral leads.

Suits owners of listed eMachines desktops

This supply suits owners of the specified eMachines models needing a like-for-like 420W replacement with the exact connector mix provided. Builders needing higher wattage, modular cabling, or connectors not listed such as PCIe power should look at other units.

Helstu kostir

  • 420W output powers compatible eMachines desktops reliably
  • Switchable 110V or 220V input suits different mains voltages
  • 20+4 pin ATX connector fits both 20-pin and 24-pin motherboards
  • One SATA connector plus multiple peripheral plugs support drives and accessories
  • Single 80mm fan cools the unit while it runs

Tæknilýsing

BrandReplace Power
ModelRPSU-C99-69
ColorGrey
TypeATX
Fans1
Weight0.1

Spurningar um þessa vöru

What cables come with the RPSU-C99-69 and is anything missing?

The unit includes a 15-inch SATA connector, a 14-inch 20+4 pin ATX connector, a 14-inch 12V ATX connector, two 15-inch large peripheral connectors, two 6-inch large peripheral connectors and one 6-inch small peripheral connector. No extra cables are required for a standard build.

Which wattage version of this Replace Power unit should I choose for an eMachines W2646?

The RPSU-C99-69 is offered only as a 420W model, which matches the original specification for the eMachines W2646, W1700, T6542, T6522, T5234 and T5086 systems.

What does the 420W rating mean once the PSU is installed in my PC?

It indicates the maximum continuous DC power the supply can deliver across all rails combined, supporting typical motherboards, drives and peripherals in the listed eMachines and compatible HP, Dell or Compaq desktops.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.