BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
RIMLANCE
Dual-channel 8GB DDR4 kit with two 4GB UDIMM modules at 2400MHz CL17 and 1.2V
This RIMLANCE kit contains two 4GB DDR4 UDIMM modules for a total of 8GB. It is aimed at desktop users who need a straightforward memory upgrade to improve multitasking and system responsiveness. The dual-channel configuration helps the memory controller move data more efficiently than a single stick. Builders who need more than 8GB of total capacity or who require ECC error correction should look elsewhere.
The modules run at DDR4 2400 with a CAS latency of CL17 and operate at 1.2V. This speed and timing combination is the single figure that determines whether the kit matches the motherboard’s supported memory standard. If the platform only accepts a different DDR4 data rate or a lower latency, the system may fall back to a slower speed or fail to boot.
The 288-pin unbuffered DIMMs install like any standard desktop memory: align the notch, press down until the retention clips click, and power on. No special tools or configuration are required. The most common issue is mixing these sticks with existing modules of a different speed or latency, which can cause instability; using the pair alone or with identical spec modules avoids that problem.
| Brand | RIMLANCE |
|---|---|
| Model | RUD19200S6C2K8 |
| Capacity | 8GB (2 x 4GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Chipset | Major Brand Chipset |
The kit runs at 2400MHz with CL17 timing, giving a PC4-19200 bandwidth rating that lets a desktop handle several applications at once without stalling.
PC4-19200 is the peak transfer rate for DDR4-2400; the memory controller will not push data faster than this ceiling, so the modules operate at their rated ceiling.
Yes, each 4GB module uses the 288-pin UDIMM form factor at 1.2V, matching the physical and electrical layout of ordinary desktop memory sockets.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Ekkert tungumál fannst.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?