SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
Seagate
A 4TB 3.5-inch desktop drive spinning at 5900 RPM with 64MB cache and SATA 6.0Gb/s interface
The Seagate ST4000NC000 is a 4TB 3.5-inch internal hard drive built for continuous operation in desktop and entry-level server environments. It spins at 5900 RPM with a 64MB cache and connects through a SATA 6.0Gb/s interface. The bare-drive unit includes Instant Secure Erase for simplified retirement.
This drive suits users who need affordable, always-on storage for backups, archives or replicated data sets where sustained throughput matters more than peak speed. It is not intended for high-performance gaming, workstation scratch disks or workloads demanding low latency and high IOPS.
At 4.3 watts typical operating power the drive leaves ample thermal headroom in multi-bay chassis. The 4TB capacity handles large media libraries and long-term retention policies comfortably. Sequential transfers will saturate the SATA link before the platters become the bottleneck, while random access tops out at the mechanical limits of 5900 RPM and 5.1ms average latency.
| Brand | Seagate |
|---|---|
| Model | ST4000NC000 |
| Packaging | Bare Drive |
| Interface | SATA 6.0Gb/s |
| Capacity | 4TB |
| RPM | 5900 RPM |
| Cache | 64MB |
| Average Latency | 5.1ms |
| Features | HDD Capacity to Grow On -4TB drives for maximum scalability -Energy efficient at under 4.3Watts operating power -SATA 6Gb/s interface for easy integration Reliable HDD and Low-Power for Efficient Storage -Enterprise-ready RV tolerance for efficient multi-drive systems -Bad-block management (BBM) and improved error detection -Lowest power consumption in a 3.5-inch form factor Secure and Easy Drive Disposal -Every day, thousands of terabytes of data leave data centers as old systems are retired -Seagate Instant Secure Erase feature renders all data on the hard drive unreadable in a mat |
| Usage | For Daily Computing |
| Form Factor | 3.5" |
| Sendingarþyngd | 1.36 kg |
| Stærð sendingar | 168 × 122 × 36 mm |
The drive uses a SATA 6.0Gb/s interface and works with any SATA revision; it will negotiate the highest speed both ends support.
The drive negotiates down to 3Gb/s automatically; sustained throughput stays within that link so the older controller will not be a practical limit.
Use a tool that reads the drive's security status — such as hdparm -I or SeaTools — and verify the "SED" or "ISE" field shows supported and enabled.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Ekkert tungumál fannst.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?