Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green low-profile PCI card with one DB9 serial port and metal bracket

SIIG, Inc

SIIG, Inc LP-P10011-S6 Low Profile PCI Serial Port Expansion Card 16550 230 Kbps

SKU CH-KYG4-WSQ70 MPN LP-P10011-S6

Adds a single high-speed 16550 serial port at up to 230 Kbps to low-profile PCI systems

  • TypePCI to Serial Port Card
  • External Ports1 x Serial Port
  • Data Transfer Rateup to 230 Kbps
  • Operating Systems SupportedWindows 95/98/98SE/ME/NT 4.0/2000/XP (32-/64-bit)/Server 200
  • SpecificationsRegulatory approval(s): FCC Class B (DoC) & CE RoHS-complian
  • FeaturesA low profile form factor PCI card made for space constraine
  • Adds one 16550 serial port at up to 230 Kbps
  • Low-profile bracket fits space-constrained desktop systems
  • IRQ sharing and 32-byte FIFO buffers reduce conflicts and boost throughput
  • Configurable 5 V / 12 V power output for scanners and POS displays
  • Works in 32-bit / 64-bit, 3.3 V / 5 V PCI and PCI-X slots

Low Profile PCI Serial Card

This low-profile PCI expansion card adds one 9-pin RS232 serial port to desktop systems with limited bracket space. It is intended for users who need a single legacy serial connection for industrial, point-of-sale or older peripheral equipment. The card fits 32-bit PCI and PCI-X slots operating at 3.3 V or 5 V. It is not suited for buyers who require multiple serial ports or a PCI Express interface.

Build Quality and Daily Use

The adapter uses a CyberPro UART with 16550 compatibility and 32-byte FIFO buffers to maintain throughput under multitasking loads. An enhanced bend-resistant bracket secures the DB9 connector against cable strain. IRQ sharing reduces conflicts with other expansion cards, and PME support allows the port to wake the system from low-power states. The port can be configured for standard RS232 signalling or for 5 V and 12 V power output to run scanners or POS displays without external supplies.

Practical Limits of the PCI Interface

Data transfer tops out at 230 Kbps, which matches the UART specification but is far below modern bus capacities. Driver support ends with Windows Vista and Server 2003 in both 32-bit and 64-bit editions, so the card will not function on Windows 7 or later without unverified third-party drivers. The 32-bit PCI bus limits installation to older motherboards or industrial boards that retain legacy slots. Buyers needing higher speeds or current operating-system support should consider USB-to-serial alternatives.

Helstu kostir

  • Adds one 16550 serial port at up to 230 Kbps
  • Low-profile bracket fits space-constrained desktop systems
  • IRQ sharing and 32-byte FIFO buffers reduce conflicts and boost throughput
  • Configurable 5 V / 12 V power output for scanners and POS displays
  • Works in 32-bit / 64-bit, 3.3 V / 5 V PCI and PCI-X slots

Tæknilýsing

BrandSIIG
ModelLP-P10011-S6
TypePCI to Serial Port Card
External Ports1 x Serial Port
Data Transfer Rateup to 230 Kbps
Operating Systems SupportedWindows 95/98/98SE/ME/NT 4.0/2000/XP (32-/64-bit)/Server 2003 (32-/64-bit)/Vista (32-/64-bit)
SpecificationsRegulatory approval(s): FCC Class B (DoC) & CE
RoHS-compliant
Chip: CyberPro
Bus type: 32-bit PCI
IRQ sharing reduces IRQ conflicts
Built-in 32-byte FIFO buffers dramatically increase data transmit/receive speed, especially under Windows multitasking environment
4-layer PCB board: separate layers for data & grounding. Greatly reduces signal noise & loss. Delivers more reliable high-speed data transfers
Enhanced bracket design to prevent bending. Connected to PCB with washered screws for a more secure connection
Supports 3.3V operation with 5V tolerance
Conforms to PCI v2.2 universal
FeaturesA low profile form factor PCI card made for space constrained system designs
Supports 32-/64-bit, 3.3V/5V PCI and PCI-X slots
Will work as standard RS232 port or with 5V or 12V power output for devices that require power (such as handheld scanners, table scanners, POS displays, etc.). Configurable via jumpers with silk-screened settings on PCB
Sendingarþyngd0.45 kg
Stærð sendingar203 × 152 × 51 mm

Spurningar um þessa vöru

What PCI bus standard does the LP-P10011-S6 use and what maximum data rate does it support?

The card plugs into a 32-bit PCI slot and the on-board 16550 UART delivers up to 230 Kbps.

What bracket and slot voltage does this low-profile card require?

It ships with a bend-resistant low-profile bracket and works in 3.3 V or 5 V PCI and PCI-X slots.

How is the serial port mode set to standard RS232 or powered 5 V/12 V output?

Move the on-board jumper block to the desired position before installing the card in the system.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.