Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Small green circuit board with SATA and USB connectors

SMUGDESK

SMUGDESK 1.8 Inch mSATA to SATA Adapter Kit with USB 2.0 Cable

SKU CH-54WA-EC3KA

Converts 1.8-inch mSATA SSDs to standard SATA or USB 2.0 external storage for data backup and recovery

  • Turn 1.8" mSATA SSD into internal SATA drive using 7+15Pin connector
  • Convert mSATA SSD to portable USB 2.0 storage with included cable
  • Plug-and-play operation on Windows, Mac OS and Linux without drivers
  • Compact PCB design fits tight spaces inside chassis or enclosures
  • Reuse idle 1.8" mSATA SSD for backup, file transfer or data recovery

Dual-Interface mSATA Adapter

This kit converts a 1.8 inch mSATA solid-state drive to a standard 7+15Pin SATA connection for internal installation. A supplied SATA to USB 2.0 cable also enables external portable use. It targets users who want to repurpose idle 1.8 inch mSATA SSDs for backup, file transfer or data recovery without installing extra drivers.

Sustained USB 2.0 Throughput

When used externally the adapter operates at USB 2.0 specification speeds, so long transfers run at the bus limit rather than the drive’s internal ceiling. The plug-and-play design maintains stable signalling across Windows, Mac OS and Linux during extended copy or recovery sessions. No active cooling or firmware updates are required to sustain this behaviour.

Compact PCB with Fixed Connectors

The small circuit board fits tight chassis spaces and adds negligible weight to a 1.8 inch SSD. Fixed 7+15Pin SATA and USB 2.0 ports mean no loose dongles to misplace during daily transport. Note that the adapter only accepts 1.8 inch mSATA SSDs; M.2 NVMe, M.2 SATA and 2.5 inch drives are not compatible.

Helstu kostir

  • Turn 1.8" mSATA SSD into internal SATA drive using 7+15Pin connector
  • Convert mSATA SSD to portable USB 2.0 storage with included cable
  • Plug-and-play operation on Windows, Mac OS and Linux without drivers
  • Compact PCB design fits tight spaces inside chassis or enclosures
  • Reuse idle 1.8" mSATA SSD for backup, file transfer or data recovery

Tæknilýsing

Engin birt tæknilýsing fyrir þessa vöru enn.

Spurningar um þessa vöru

Does the USB 2.0 link limit the mSATA SSD's speed during all-day transfers?

The adapter's external path is capped at USB 2.0 throughput, so sustained reads and writes will run at that rate regardless of the drive's own capability.

What host connectors must my system provide to use both internal and external modes?

You need a free 7+15-pin SATA data and power header inside the case for internal use, or a standard USB Type-A port for the supplied SATA-to-USB 2.0 cable.

Can I keep using a 2.5-inch SATA drive in the same machine while this adapter runs an mSATA SSD?

Yes — the adapter occupies its own SATA port and power connector, so a separate 2.5-inch SATA drive on another port works independently.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.