SMUGDESK
SMUGDESK 12+6Pin to SATA 22Pin Adapter for MacBook Air A1369 A1370 2010 2011
Converts original 12+6pin MacBook Air SSD to standard 22pin SATA for desktop reuse
- Converts proprietary 12+6pin MacBook Air SSD to standard 22pin SATA port
- Works exclusively with 2010 and 2011 MacBook Air A1369 and A1370 original SSDs
- Premium PCBA board with gold-plated pins ensures stable SATA signal transmission
- Simple hardware installation lets you reuse old SSD as desktop storage without drivers
- Cost-effective solution for data backup, storage reuse and hardware recycling
12+6Pin to SATA Adapter for MacBook Air SSDs
This adapter converts the proprietary 12+6pin SSD interface from 2010 and 2011 MacBook Air models A1369 and A1370 into a standard 22pin SATA connection. It allows you to repurpose the original Apple SSD as internal storage for a desktop PC or external SATA enclosure. The unit is a passive PCBA board requiring no drivers or software. It is strictly limited to genuine 12+6pin SSDs from those specific laptops and cannot support other Mac SSD generations or NVMe drives.
Passive PCBA design runs without active cooling
The adapter contains no fan, heatsink or voltage regulation circuitry, so it adds no noise and draws negligible power beyond the SSD itself. Signal integrity is maintained through a gold-plated contact layout on a quality circuit board substrate. Thermal performance depends entirely on the host system airflow around the installed SSD. Because it is a pure hardware pass-through, there is no firmware overhead or latency introduced during normal data transfer operations.
Includes only the adapter board.
The package supplies the conversion PCBA alone, letting you reuse an existing MacBook Air SSD you already own. You must provide a standard SATA data cable and SATA power cable to complete the connection to a desktop motherboard or enclosure. No mounting bracket, drive tray or cloning software is bundled. This minimal approach keeps cost low for users who already have spare cables and a target system ready for the recycled drive.
Helstu kostir
- Converts proprietary 12+6pin MacBook Air SSD to standard 22pin SATA port
- Works exclusively with 2010 and 2011 MacBook Air A1369 and A1370 original SSDs
- Premium PCBA board with gold-plated pins ensures stable SATA signal transmission
- Simple hardware installation lets you reuse old SSD as desktop storage without drivers
- Cost-effective solution for data backup, storage reuse and hardware recycling
Tæknilýsing
Engin birt tæknilýsing fyrir þessa vöru enn.
Spurningar um þessa vöru
How do I install the 12+6Pin SSD onto the adapter board and connect it to a desktop?
Align the SSD's 12+6pin connector with the adapter socket, press firmly until fully seated, then attach a standard SATA data cable and SATA power cable to the 22pin port for desktop use.
What future maintenance or replacement should I expect for the adapter's gold-plated contacts?
The gold-plated contact pins resist oxidation; occasional dry reseating of the SSD and SATA cables clears dust buildup and maintains reliable signal transmission over time.
What limit appears first when the adapter runs under sustained data transfer loads?
The bottleneck is the original SSD's own SATA speed ceiling, not the adapter, since the PCBA board simply passes native SATA signals without adding latency or conversion overhead.
Einnig í þessum vöruflokki
Fólk bar þetta saman
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Black Box Corporation
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics
39,99 USD
0.00051703BTC
Til á lager