Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Small green circuit board with 40-pin IDE connector and SATA port plus 7-pin SATA cable

SMUGDESK

SMUGDESK IDE PATA 40Pin to SATA Female Converter with 7Pin Cable for 3.5inch HDD

SKU CH-36T7-A8WP7

Converts 40-pin PATA IDE 3.5-inch hard drives to SATA for use on modern motherboards, includes 7-pin data cable, driver-free hardware design

  • Connect legacy 3.5inch IDE drives to modern SATA motherboards
  • 40pin PATA to SATA female hardware conversion
  • Includes 7pin SATA data cable for motherboard link
  • Plug and play operation with no drivers needed
  • Enables old data recovery and drive reuse projects

IDE PATA 40-Pin to SATA Converter

This adapter board converts a 40-pin parallel ATA hard drive to a SATA interface. It allows a 3.5-inch IDE drive to connect to a modern desktop motherboard. The package includes a 7-pin SATA data cable for the motherboard connection. No driver installation is required for operation.

Suits legacy drive recovery and hardware reuse

Buyers needing to access data from vintage 40-pin PATA desktop drives on SATA-only systems will find this suitable. It is not for users with 44-pin notebook IDE drives, as the connector pin count differs. The adapter also does not supply power; a separate 4-pin Molex connection to the drive is still necessary. Builders without a free Molex lead or a SATA port on the motherboard cannot use this converter.

40-pin PATA IDE interface compatibility

This converter works exclusively with 3.5-inch hard drives that use the 40-pin parallel ATA interface. It will not function with 44-pin laptop drives or any other interface type. Verifying the drive connector before purchase is essential. The single specification that decides fit is the 40-pin PATA interface on the target hard drive.

Helstu kostir

  • Connect legacy 3.5inch IDE drives to modern SATA motherboards
  • 40pin PATA to SATA female hardware conversion
  • Includes 7pin SATA data cable for motherboard link
  • Plug and play operation with no drivers needed
  • Enables old data recovery and drive reuse projects

Tæknilýsing

Engin birt tæknilýsing fyrir þessa vöru enn.

Spurningar um þessa vöru

Will this 40pin converter board fit inside a standard desktop case alongside a 3.5inch drive?

The bareboard PCBA is compact and designed to save installation space inside a computer case, so it fits alongside a 3.5inch drive in standard desktop chassis.

What is the step people get wrong when installing this IDE to SATA adapter?

Connect the 40pin IDE drive to the converter, attach the included 7pin SATA data cable from the converter to the motherboard, and do not forget the separate 4pin Molex power connector for the drive.

Does the 7pin SATA data cable included with this converter need periodic replacement?

The 7pin SATA data cable is a passive component with no moving parts and does not require scheduled replacement under normal use.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.