Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Rectangular E1.S 15mm SSD with green PCB and gold edge connector

Solidigm

Solidigm D7-P5520 3.84TB E1.S 15mm enterprise SSD (SSDPFVKX038T1N1)

SKU CH-4505-3GE7J MPN SSDPFVKX038T1N1

E1.S 15mm enterprise SSD with 3.84TB of 144L TLC 3D NAND and PCIe 4.0 x4 interface for data-centre servers

  • Form FactorE1.S 15mm
  • Capacity3.84TB
  • Memory Components144L TLC 3D NAND
  • InterfacePCI-Express 4.0
  • MTBF2,000,000 hours
  • Max Shock Resistance1,000 G (Max) at 0.5 msec

Options 3.84TB, E1.S 15mm, Non-OPAL

Sjá 2 stillingar til viðbótar
  • High capacity 3.84TB E1.S 15mm form factor
  • 144L TLC 3D NAND for high density storage
  • PCI-Express 4.0 interface enables fast data transfer
  • 2,000,000 hours MTBF supports long-term reliability
  • 1,000 G shock resistance protects data integrity

Solidigm D7-P5520 3.84TB enterprise drive

The Solidigm D7-P5520 is a 3.84TB enterprise SSD built on 144L TLC 3D NAND. It uses a PCI-Express 4.0 interface in the E1.S 15mm form factor. A 2,000,000-hour MTBF and shock resistance of 1,000 G at .5 msec support continuous data-centre operation.

Suits dense server deployments needing PCIe 4.0

This drive fits servers that accept E1.S 15mm modules and require high endurance for read-intensive workloads. Builders whose chassis only support M.2 or U.2 form factors cannot use it. Buyers who need hardware encryption will also need a different model.

3.84TB capacity handles large read-heavy datasets

The 3.84TB capacity comfortably stores operating-system images, logs and cached content for scale-out storage nodes. Write-heavy database workloads may exhaust endurance sooner than mixed-use drives rated for higher drive writes per day. Vibration tolerance reaches 2.17 GRMS at 700 Hz operating and 3.13 GRMS at 800 Hz non-operating.

Helstu kostir

  • High capacity 3.84TB E1.S 15mm form factor
  • 144L TLC 3D NAND for high density storage
  • PCI-Express 4.0 interface enables fast data transfer
  • 2,000,000 hours MTBF supports long-term reliability
  • 1,000 G shock resistance protects data integrity

Tæknilýsing

BrandSolidigm
SeriesD7-P5520
ModelD7-P5520
Form FactorE1.S 15mm
Capacity3.84TB
Memory Components144L TLC 3D NAND
InterfacePCI-Express 4.0
MTBF2,000,000 hours
Max Shock Resistance1,000 G (Max) at 0.5 msec
Max Vibration ResistanceOperating: 2.17 GRMS (5 - 700 Hz) Max
Non-Operating: 3.13 GRMS (5 - 800 Hz) Max
Sendingarþyngd0.17 kg
Stærð sendingar432 × 313 × 140 mm

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Does my server have an E1.S 15mm bay and a PCI-Express 4.0 x4 lane available for this drive?

The D7-P5520 fits an E1.S 15mm slot and requires a PCI-Express 4.0 x4 connection to operate at full speed.

Will this 144L TLC 3D NAND SSD share a PCIe 4.0 bus with an older PCIe 3.0 drive without slowing the new one down?

Each drive negotiates its own link width; the D7-P5520 will run at PCIe 4.0 x4 while a PCIe 3.0 device stays at 3.0 speeds on the same root complex.

How can I verify the 3.84TB D7-P5520 is healthy after installation?

Check SMART attributes for media wear, temperature and the 2,000,000-hour MTBF rating; run a full media scan to confirm zero reallocated sectors.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.