Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Square grey 120mm frame, slim 15mm profile, black blades, four-pin connector, rubber corners

SXDOOL

SXDOOL 12015 120mm 15mm PWM Case Fan Gray

SKU CH-B9S2-C1Z88

A 120 mm PWM case fan just 15 mm thick delivers 53.6 CFM at 13.8–30.2 dB(A) using a hydraulic bearing

  • TypeCase Fan
  • Bearing TypeHydraulic
  • RPM600~1600RPM
  • Air Flow53.6CFM
  • Noise Level13.8~30.2dB(A)
  • Power Connector4 Pin
  • 15 mm slim profile fits tight small-form-factor builds
  • Hydraulic bearing runs at 13.8 dB(A) minimum for near-silent idle
  • PWM control spans 600 to 1600 RPM for precise thermal management
  • 6 CFM airflow delivers strong cooling through restrictive grilles
  • 4-pin 12 V connector draws just 3.84 W at full speed

Slim 15 mm case fan

The SXDOOL 12015 is a 120 mm case fan built at 15 mm thickness for compact chassis where standard thicker fans cannot fit. It uses a hydraulic bearing and a 4 pin PWM connector for speed control between 600 and 1600 RPM.

Builders with tight clearances

This fan suits small-form-factor systems and low-profile coolers that demand a 15 mm profile. It is not for buyers who need higher static pressure or maximum airflow from a full-thickness design.

53.6 CFM airflow at 30.2 dB(A)

The single figure that decides fit is the 53.6 CFM airflow rating paired with a 13.8 to 30.2 dB(A) noise range. If your thermal target requires more air movement than this spec delivers, you must select a different fan.

Helstu kostir

  • 15 mm slim profile fits tight small-form-factor builds
  • Hydraulic bearing runs at 13.8 dB(A) minimum for near-silent idle
  • PWM control spans 600 to 1600 RPM for precise thermal management
  • 6 CFM airflow delivers strong cooling through restrictive grilles
  • 4-pin 12 V connector draws just 3.84 W at full speed

Tæknilýsing

TypeCase Fan
Bearing TypeHydraulic
RPM600~1600RPM
Air Flow53.6CFM
Noise Level13.8~30.2dB(A)
Power Connector4 Pin
ColorGray
LEDNon-LED

Spurningar um þessa vöru

How much air does the 53.6 CFM rating actually move inside a compact case?

At full speed the fan pushes 53.6 CFM through a 15 mm frame, giving strong airflow for small-form-factor builds where space is tight.

What does the 4-pin PWM connector let the motherboard control?

The 4-pin PWM header allows the board to vary speed precisely between 600 and 1600 RPM, so noise drops to 13.8 dB(A) at idle and rises only when cooling is needed.

Will the 120 × 120 × 15 mm frame fit my slim chassis and standard 120 mm mounts?

Yes — the 15 mm thickness is designed for slim cases, while the 120 mm square footprint matches regular 120 mm mounting holes and the included rubber pads absorb vibration.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.