Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Black 80 mm square frame fan with hydraulic bearing and four-pin PWM connector

SXDOOL

SXDOOL 80mm PWM Case Fan Hydraulic 1300-4000 RPM 4-Pin Black

SKU CH-BJP1-MNZPF

80 mm hydraulic-bearing case fan with 4-pin PWM control running from 1300 to 4000 RPM

  • TypeCase Fan
  • Fan Size80mm
  • Bearing TypeHydraulic
  • RPM4000-4499 RPM
  • Power Connector4 Pin
  • ColorBlack
  • PWM speed control lets the fan run from 1300 to 4000 RPM
  • Hydraulic bearing gives maintenance-free operation and quiet running
  • 80 mm frame fits standard 8025 mounting holes
  • 4-pin connector enables motherboard-controlled fan curves
  • 12 V / 0.40 A draw keeps power use low

80mm PWM hydraulic case fan

The SXDOOL 80mm case fan uses a hydraulic bearing and a 4-pin PWM connector for automatic speed control. It fits standard 80 x 80 x 25 mm mounting points and runs on 12 V DC power. The black, non-LED frame keeps the appearance neutral inside any chassis.

Suited for compact builds needing variable airflow

This fan serves small-form-factor cases or CPU coolers that require an 80 mm frame with PWM regulation. Buyers who need larger diameters, RGB lighting or higher static pressure for dense radiators should look at other models.

Sustained operation at controlled speeds

The hydraulic bearing maintains consistent performance during continuous use while PWM adjusts the motor between 1300 and 4000 RPM based on temperature. The 0.40 A current draw stays steady so the fan delivers reliable cooling without sudden speed spikes.

Helstu kostir

  • PWM speed control lets the fan run from 1300 to 4000 RPM
  • Hydraulic bearing gives maintenance-free operation and quiet running
  • 80 mm frame fits standard 8025 mounting holes
  • 4-pin connector enables motherboard-controlled fan curves
  • 12 V / 0.40 A draw keeps power use low

Tæknilýsing

TypeCase Fan
Fan Size80mm
Bearing TypeHydraulic
RPM4000-4499 RPM
Power Connector4 Pin
ColorBlack
LEDNon-LED

Spurningar um þessa vöru

What motherboard header is required to run the 4-pin PWM control on this 80mm fan?

A standard 4-pin PWM fan header on the motherboard is needed; the fan draws 0.40 A at 12 V.

Will the hydraulic bearing maintain the 1300 RPM minimum speed if I keep my older 3-pin voltage-controlled headers?

No, the 1300 RPM floor is only reached through PWM signalling; on a 3-pin header the fan will run at full voltage and stay near its 4000 RPM maximum.

How can I confirm the fan is responding to the PWM curve after installation?

Use BIOS or monitoring software to watch the RPM reading change smoothly between 1300 and 4000 RPM as the temperature target moves.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.